Магнитолы Soundmax SM-CMD3015 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
16
Mute function
Press MUTE button on the RC or press and hold MOD/MUT button on the panel to turn off the sound. Or
touch MUTE icon available in SOUND page or in Radio interface. “MUTE ON” appears on the display. Press
the button again or adjust volume to resume the sound output.
Volume control
Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to decrease or increase sound
volume level. Or touch + and – icons referring to VOL item in SOUND page.
Setting the sound characteristics
Press repeatedly SELECT button on the panel or SEL button on the RC to select the audio setting: VOL
(volume) => BAS (bass) => TRE (treble) => BAL (balance) => FAD (fader). Press VOL+/VOL- buttons on
the RC or rotate VOLUME regulator on the panel to adjust the selected item. Balance is to adjust the balance
between the left and right speakers. Fader is to adjust the balance between the rear and front speakers. Or
touch + and – icons referring to corresponding parameter in SOUND page. After you have reached your
desired effect, leave the unit idle in order for the new setting to take effect.
Note: If the equalizer is set on, bass and treble are not adjustable.
EQ modes
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows EQ OFF. Press
VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to choose an equalizer effect: POP
=> ROCK => CLASS => FLAT => EQ OFF. Or touch repeatedly EQ icon available in SOUND page. After you
have reached your desired effect, leave the unit idle in order for the new setting to take effect.
Loudness
Press repeatedly SELECT button on the panel or SEL button on the RC until the display shows LOUD ON
(LOUD OFF). Press VOL+/VOL- buttons on the RC or rotate VOLUME regulator on the panel to select
between LOUD ON/LOUD OFF. Or touch LOUD icon available in SOUND page. LOUD function is to emphasize
the bass output; the word LOUD ON indicates that the LOUD mode is on.
Best Music Position and Double Bass
In SOUND page touch MBP icon to select left (L) or Right (R) channel for best music position. Touch DBAS
icon to switch on or off double bass function.
