Sony XR-4200R - Инструкция по эксплуатации - Страница 26

26

Additional
Information

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the
power connection and replace the fuse. If the
fuse blows again after replacement, there may
be an internal malfunction. In such a case,
consult your nearest Sony dealer.

Warning

Never use a fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.

Fuse (10 A)

Cleaning the connectors

The unit may not function properly if the
connectors between the unit and the front
panel are not clean. In order to prevent this,
open the front panel by pressing 

(OPEN)

, then

detach it and clean the connectors with a
cotton swab dipped in alcohol. Do not apply
too much force. Otherwise, the connectors may
be damaged.

Main unit

Back of the front panel

Notes
• For safety,  turn off the engine before cleaning

the connectors and remove the key from the
ignition switch.

• Never touch the connectors directly with your

fingers or with any metal device.