Sony XR-4200R - Инструкция по эксплуатации - Страница 21

21

GB

Press 

(DSPL)

 to change

the displayed items.

Press 

(SOUND)

 to

adjust the volume
and sound menu.

To increase

Tip
While the ATA function is activated, the display
(TAPE 

y

 TUNER) can be changed by pressing

(DSPL)

.

Changing the operative direction

The operative direction of controls is factory-
set as shown below.

If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.

Press 

(SOUND)

 for two seconds while

pushing the VOL control.

Tip
You can also change the operative direction of
these controls with the unit (see “Changing the
sound and display settings” on page 22).

Adjusting the sound
characteristics

You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.

1

Select the item you want to adjust by
pressing 

(SOUND)

 repeatedly.

Each time you press 

(SOUND)

, the item

changes as follows:

BAS (bass) 

t

 TRE (treble) 

t

BAL (left-right) 

t

 FAD (front-rear)

2

Adjust the selected item by pressing
either side of 

(SEEK/AMS)

.

When adjusting with the rotary
commander, press 

(SOUND)

 and rotate the

VOL control.

Note
Adjust within three seconds after selecting the
item.

Attenuating the sound

Press 

(ATT)

 on the rotary commander or

card remote commander.

“ATT-ON” flashes momentarily.

To restore the previous volume level, press

(ATT)

 again.

Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes
in (Telephone ATT function).
(XR-C5300RX/C5300RV/C5300R/4300RX/4300RV/
4300R only)

To decrease