Sony XR-4200R - Инструкция по эксплуатации - Страница 20

20

OFF

Rotate the VOL control to
adjust the volume.

Press 

(ATT)

 to

attenuate the
sound.

Press 

(OFF)

 to turn

off the unit.

Other operations

Note
When installing in a car without ACC (accessory)
position on the ignition key switch, press 

(OFF)

 for

two seconds to turn off the clock display after
turning off the engine.

By rotating the control
(the SEEK/AMS control)

Rotate the control and release it to:

• Locate the beginnings of tracks on the

tape. Rotate and hold the control, and
release it to fast-wind the tape. To start
playback while fast-winding the tape,
press 

(MODE)

.

• Locate a specific track on a disc. Rotate

and hold the control until you locate the
specific point in a track, then release it to
start playback.

• Tune in stations automatically. Rotate and

hold the control to find a specific station.

By pushing in and rotating the
control (the PRESET/DISC control)

Push in and rotate the control to:

• Receive the stations memorised on the

number buttons.

• Change the disc.

Using the rotary
commander

The rotary commander works by pressing
buttons and/or rotating controls.

XR-C5300RX/C5300RV/C5300R/C5200R
only:

You can also control the optional CD or MD
units with the rotary commander.

By pressing buttons
(the SOURCE and MODE buttons)

Each time you press 

(SOURCE)

, the

source changes as follows:

TUNER 

t

 CD

*

t

 MD

*

t

 TAPE

Pressing 

(MODE)

 changes the operation

in the following ways;

• Tuner :

FM1 

t

 FM2 

t

 FM3 

t

 MW

t

 LW

• Tape :

playback direction

• CD unit

*

 : CD1 

t

 CD2 

t

 …

• MD unit

*

 : MD1 

t

 MD2 

t

 …

*

If the corresponding optional equipment is
not connected, the item will not appear
(XR-C5300RX/C5300RV/C5300R/C5200R only).

(SOURCE)

(MODE)