Pioneer MVH-08UB (UBG) - Инструкция по эксплуатации - Страница 12

12

H:\PDF-OUT\127075006696_KM636UW\020Chapter_EN.fm

MVH-08UB/MVH-08UBG

127075006696

En

The display automatically returns to 
the normal display.

→

No operations have been made for 
about 30 seconds.
– Perform an operation.

The repeat play range changes 
unexpectedly.

→

Depending on the repeat play 
range, the selected range may 
change when another folder or 
track is being selected or during 
fast forwarding/reversing.
– Select the repeat play range 

again.

A subfolder is not played back.

→

Subfolders cannot be played when 
[FLD] (folder repeat) is selected.
– Select another repeat play range.

The sound is intermittent.

→

You are using a device, such as a 
cellular phone, that may cause 
audible interference.
– Move electrical devices that may 

be causing the interference away 
from the unit.

Common

AMP ERROR

→

This unit fails to operate or the 
speaker connection is incorrect.

→

The protective circuit is activated.
– Check the speaker connection.
– Turn the ignition switch OFF and 

back to ON again. If the message 
remains, contact your dealer or an 
authorized Pioneer Service 
Station for assistance.

USB device

NO AUDIO

→

There are no songs.
– Transfer the audio files to the USB 

device and connect.

→

The connected USB device has 
security enabled.
– Follow the USB device 

instructions to disable the 
security.

SKIPPED

→

The connected USB device contains 
DRM protected files.
– The protected files are skipped.

PROTECT

→

All the files on the connected USB 
device are embedded with DRM.
– Replace the USB device.

Additional Information

Troubleshooting

Error messages

N/A USB

→

The connected USB device is not 
supported by this unit.
– Disconnect your device and 

replace it with a compatible USB 
device.

CHECK USB

→

The USB connector or USB cable 
has short-circuited.
– Check that the USB connector or 

USB cable is not caught in 
something or damaged.

→

The connected USB device 
consumes more than maximum 
allowable current.
– Disconnect the USB device and 

do not use it. Turn the ignition 
switch OFF and back to ACC or 
ON. Connect only compliant USB 
devices.

ERROR-19

→

Communication failed.
– Perform one of the following 

operations, then return to the 
USB source.

•

Turn the ignition switch OFF and 
back to ON.

•

Disconnect the USB device.

•

Change to a different source.

ERROR-23

→

USB device was not formatted 
properly.
– Format the USB device with 

FAT12, FAT16 or FAT32.

USB storage device

•

Connections via USB hubs are not 
supported.

•

Firmly secure the USB storage device 
before driving. Do not let the USB 
storage device fall onto the floor, 
where it may become jammed under 
the brake or accelerator pedal.

•

Depending on the USB storage 
device, the following problems may 
occur.
– Operations  may  vary.
– The storage device may not be 

recognized.

– Files may not be played back 

properly.

– The device may cause audible 

interference when you are listening 
to the radio.

•

Only the first 32 characters can be 
displayed as a file name (including 
the file extension) or a folder name.

•

The unit may not work properly 
depending on the application used 
to encode WMA files.

•

There may be a slight delay at the 
start of the playback of audio files 
embedded with image data, or audio 
files stored on a USB device with 
numerous folder hierarchies.

Handling guidelines

Compressed audio 
compatibility

_127075006696_artwork.book  Page 12  Monday, July 27, 2015  10:01 AM