Kenwood KRC-21SA(SG) - Инструкция по эксплуатации - Страница 3

— 3 —

To prevent injury and/or fire, take the
following precautions:

• Insert the unit all the way until it is fully

locked in place. Otherwise it may fly out of
place during collisions and other jolts.

• When extending the ignition, battery, or

ground wires, make sure to use automotive-
grade wires or other wires with a 0.75mm

2

(AWG18) or more to prevent wire
deterioration and damage to the wire
coating.

• To prevent short circuits, never put or leave

any metallic objects (e.g., coins or metal
tools) inside the unit.

• If the unit starts to emit smoke or strange

smells, turn off the power immediately and
consult your Kenwood dealer.

• Make sure not to get your fingers caught

between the faceplate and the unit.

• Be careful not to drop the unit or subject it to

strong shock.
The unit may break or crack because it
contains glass parts.

• Do not touch the liquid crystal fluid if the

LCD is damaged or broken due to shock. The
liquid crystal fluid may be dangerous to your
health or even fatal.
If the liquid crystal fluid from the LCD
contacts your body or clothing, wash it off
with soap immediately.

2

WARNING

To prevent damage to the machine,
take the following precautions:

• Make sure to ground the unit to a negative

12V DC power supply.

• Do not open the top or bottom covers of the

unit.

• Do not install the unit in a spot exposed to

direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.

• Do not set the removed faceplate or the

faceplate case in areas exposed to direct
sunlight, excessive heat or humidity. Also
avoid places with too much dust or the
possibility of water splashing.

• To prevent deterioration, do not touch the

terminals of the unit or faceplate with your
fingers.

• Do not subject the faceplate to excessive

shock, as it is a piece of precision
equipment.

• When replacing a fuse, only use a new one

with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.

• To prevent short circuits when replacing a

fuse, first disconnect the wiring harness.

• Do not place any object between the

faceplate and the unit.

• During installation, do not use any screws

except for the ones provided. The use of
improper screws might result in damage to
the main unit.

2

CAUTION

Safety precautions