Kenwood KDC-2027SA(SG) - Инструкция по эксплуатации - Страница 8

A red indicator will blink on the unit after the faceplate is
removed, warning potential thieves.

1

Turn the power OFF

Press the [SRC] button for at least 1 second.

2

Set the DSI

While pressing the [1] and [3] button, press the [SRC] button.

Each time the step 1 and 2 operation is done the DSI turns ON or
OFF.

DSI (Disabled System Indicator)

1

Select the clock display

Press the [CLK] button.

2

Enter clock adjustment mode

Press the [ADJ] button for at least 2 seconds.

The clock display blinks.

3

Adjust the hours

Press the [FM] or [AM] button.

Adjust the minutes

Press the [

4

] or [

¢

] button.

4

Exit clock adjustment mode

Press the [CLK] button.

Adjusting Clock

Press the [CLK] button.

Each time the button is pressed the clock display turns ON or
OFF.

Clock Display

Fine-tuning so that the System Q value is optimal when setting
the speaker type.

1

Enter Standby

Press the [SRC] button.

Select the "STBY" display.

2

Enter Speaker Setting mode

Press the [Q] button.

3

Select the Speaker type

Press the [

4

] or [

¢

] button.

Each time the button is pressed the setting switches as shown
below.

Speaker type

Display

OFF

"SP-F"

For the OEM speaker

"SP-O"

For 6 & 6x9 in. speaker

"SP-6"

For 5 & 4 in. speaker

"SP-5"

4

Exit Speaker Setting mode

Press the [Q] button.

Speaker Setting

General features

— 8 —

English