JVC KW-NSX1 - Инструкция по эксплуатации - Страница 66

66

ENGLISH

What appears to be trouble is not always serious. Check the following points before calling a service center.
•  For operations with the external components, refer also to the instructions supplied with the adapters used for the 

connections (as well as the instructions supplied with the external components).

•  Messages (enclosed in “ ”) in the tables below are shown in the language selected on <

Language

> (

☞

 page  46).

If the following messages appear

Message

Remedy/Cause

“No Signal”

•  Start the playback on the external component connected to VIDEO IN jack.
•  Check the cords and connections.
•  Signal input is too weak.

“MISWIRING Check wiring 
connection then reset unit”
“WARNING Check wiring 
connection then reset unit”

A speaker cord has shorted or it has come in to contact with the car chassis. 
Wire or insulate the speaker cord as appropriate, then reset the unit 
(

☞

 page 3). See also the Installation/Connection Manual.

“Parking Brake”

No playback picture is shown when the parking brake is not engaged.

“Eject Error” / “Loading Error”

Eject the disc forcibly. (

☞

 page 3)

“Restricted Device”

Check whether the connected iPod/iPhone is compatible with this unit. (

☞

page 27)

“USB Device Error”

•  The USB power voltage is abnormal.
•  Turn off and turn on the unit.
•  Connect another USB device.

“No BT Dongle”

Bluetooth adapter (KS-UBT1) is removed.

“Connection Error”

The device is registered but the connection has failed. Connect the registered 
device. (

☞

 page 51)

“Please Wait...”

The unit is preparing to use the Bluetooth function. If the message does not 
disappear, turn off and turn on the unit, then connect the device again (or reset 
the unit).

“No Voice Device”

The connected mobile phone does not have the voice recognition system.

“No Data”

No phone book data is contained in the connected Bluetooth phone.

“Initialize Error”

The unit has failed to initialize the Bluetooth module. Try the operation again.

“Dial Error”

Dialing has failed. Try the operation again.

“Hung Up Error”

The call has not ended yet. Park your car, and use the connected mobile phone 
to end the call.

“Pick Up Error”

The unit has failed to receive a call.

“Pairing Error”

Pairing between the unit and Bluetooth device has failed. Register the device 
again. (

☞

 page 50)

“No Device”

No smartphone is connected to the SMARTPHONE ADAPTER unit.

“Not active the MirrorLink App”

No MirrorLink application is active on the smartphone.

“Device Connection Error”

The device could not be connected.

Troubleshooting

EN_KW-NSX1[EU].indb   66

EN_KW-NSX1[EU].indb   66

12/04/23   16:41

12/04/23   16:41