JVC KW-AVX726 - Инструкция по эксплуатации - Страница 21

21

AV MENU

ENGLISH

Menu item

Selectable setting/item

Fader/Balance

Fader

 : Adjust the front and rear speaker output balance.

•  When using a two-speaker system, set the fader level to “0.”

♦

 F6 

to

 R6; 

Initial 

0

Balance

 : Adjust the left and right speaker output balance.

♦

 L6 

to

 R6; 

Initial 

0

Press [ 

5

/

∞

/

2

/

3

 ] to adjust.

Volume Adjust 

*

1

Adjust and store the auto-adjustment volume level for each source, comparing 
to the FM volume level. The volume level will automatically increase or decrease 
when you change the source.
• <

Fix

> appears if “ 

TUNER/Bluetooth PHONE

” is selected as the source.

♦

 –12 

to

 +12

;

Initial 

00

Subwoofer Level 

*

2

Adjust the subwoofer output level.

♦

 –06 to +08; 

Initial 

00

High Pass Filter 

*

2

♦

 Through

♦

 On

:

Select when the subwoofer is not connected.

:

Select when the subwoofer is connected.

Crossover 

*

2

Select the crossover frequency between the front/rear speakers and the 
subwoofer.

♦

 80Hz, 120Hz, 150Hz

Amplifier Gain 

*

3

You can change the maximum volume level of this unit.

♦

 Off

♦

 Low

♦

 High

:

Deactivates the built-in amplifier.

:

VOL 00 to 30 (Select this if the maximum power of the 
speakers is less than 50 W.)

:

VOL 00 to 50

*

1 

For “ 

DISC/USB

”: You can make the adjustments separately depending on the audio format—Dolby digital/MPEG 

Audio and the others.

*

2 

For 

KW-AVX726/KW-AVX725

.

*

3 

The volume level automatically changes to “VOL 30” if you change to <

Low

> with the volume level set higher than 

“VOL 30.”

Initial: 

Underlined

Back

Fader/Balance

Reset

Fader       0
Balance   0

EN12-21_KW-AVX726_005A_f.indd   21

EN12-21_KW-AVX726_005A_f.indd   21

12/19/08   10:59:11 AM

12/19/08   10:59:11 AM