JVC KD-SHX851 - Инструкция по эксплуатации - Страница 52

52

ENGLISH

To activate the Announcement Standby 
Reception

1

  Enter the MODE menu (see page 5).

2

  Select “Announce.”

3

  Select an announce type.

4

  Finish the procedure.

ANN indicator appears.

•  If the ANN indicator lights up, 

Announcement Standby Reception is 
activated.

•  If the ANN indicator flashes, 

Announcement Standby Reception is not 
yet activated. 
To activate, tune in to another service 
providing these signals. The ANN 
indicator will stop flashing and remain 
lit.

To deactivate the Announcement Standby 
Reception

Select “Off” in step 

3

 above.

The ANN indicator goes off.

Selected announcement type

When using the remote controller...

To directly select the preset service

Using the Standby Receptions

  TA (Road Traffic News) Standby 

Reception

•  Operations are exactly the same as explained 

on page 15 for FM RDS stations.

•  You cannot activate TA Standby Reception 

separately for the DAB tuner and for FM 
tuner.

•  The volume changes to the preset TA volume 

level (see page 43).

  PTY Standby Reception

•  Operations are exactly the same as explained 

on page 15 for FM RDS stations.

•  PTY Standby Reception for DAB tuner works 

only using a dynamic PTY code.

•  You can neither store your favorite PTY nor 

activate PTY Standby Reception separately 
for the DAB tuner and for the FM tuner.

•  You can activate and deactivate PTY Standby 

Reception when the source is either “FM” or 
“DAB.”

  Announcement Standby Reception

Announcement Standby Reception allows the 
receiver to switch temporarily to your favorite 
service (announcement type). 

To select your favorite announcement type,

see page 44.