JVC KD-SHX851 - Инструкция по эксплуатации - Страница 15

15

ENGLISH

Using the Standby Receptions

  TA Standby Reception

TA Standby Reception allows the receiver to 
switch temporarily to Traffic Announcement 
(TA) from any source other than AM. 
The volume changes to the preset TA volume 
level (see page 43).
•  If the DAB tuner is connected, Standby 

Reception also works to search for a DAB 
service broadcasting Traffic Announcement.

To activate TA Standby Reception

•  If the TP indicator lights up, TA Standby 

Reception is activated.

•  If the TP indicator flashes, TA Standby 

Reception is not yet activated. (This occurs 
when you are listening to an FM station 
without the RDS signals required for TA 
Standby Reception.)

  To activate TA Standby Reception, tune in to 

another station (or DAB service) providing 
these signals. The TP indicator will stop 
flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

  PTY Standby Reception

PTY Standby Reception allows the receiver 
to switch temporarily to your favorite PTY 
programme from any source other than AM.
•  If the DAB tuner is connected, Standby 

Reception also works to search for a DAB 
service.

To select your favorite PTY code for PTY 
Standby Reception,

 see page 43.

The PTY indicator either lights up or flashes.

To activate the PTY Standby Reception

1

  Enter the MODE menu (see page 5).

2

  Select “PTY.”

3

  Select one of the PTY codes.

4

  Finish the procedure.

•  If the PTY indicator lights up, PTY 

Standby Reception is activated.

•  If the PTY indicator flashes, PTY Standby 

Reception is not yet activated.

  To activate PTY Standby Reception, 

tune in to another station (or DAB 
service) providing these signals. The PTY 
indicator will stop flashing and remain lit.

To deactivate the PTY Standby Reception

Select “Off” in step 

3

 above.

The PTY indicator goes off.

TP indicator appears.

T/P

T/P

Selected PTY code

PTY indicator appears.