JVC KD-G827 - Инструкция по эксплуатации - Страница 17

17

ENGLISH

Sound adjustments

Adjusting the sound

You can adjust the sound characteristics to your 
preference.
•  When 

 appears on the display, you can 

move back to the previous display by pressing 
number button 3.

1

2

•

For “EQ” setting, see the following.

3

  Adjust the selected setting item.

A

Fad/Bal (Fader/Balance)

1

  Press number button 1 (

) to 

move to the “Fad/Bal” adjustment 
display.

2

  Adjust the speaker output balance 

by pressing:

5

 / 

∞

:  between the front and rear 

speakers. [F06 to R06]

4

/

¢

:

between the left and right 
speakers. [L06 to R06]

B

Subwoofer

1

  Press number button 1 (

) to 

move to the “Subwoofer” adjustment 
display.

2

  Use 

4

/

¢

 to select a 

cutoff frequency to the subwoofer.

•  80Hz:  Frequencies higher than 

80 Hz are cut off.

•  120Hz:  Frequencies higher than 

120 Hz are cut off.

•  160Hz:  Frequencies higher than 

160 Hz are cut off.

3

  Turn the control dial to adjust the 

subwoofer output level. [0 to 8]

C

VolAdjust

Turn the control dial to adjust the input 
level of each source (except FM). 
[–5 to +5]
Adjust to match the input level of the 
FM sound level.

• 

Before making an adjustment, select a 
source you want to adjust.

D

Loudness

Turn the control dial to activate or 
deactivate the loudness to produce a 
well-balanced sound at low volume 
levels. [Off or On]

4

  Exit from the setting.

Selecting preset sound modes 

(i-EQ: intelligent equalizer)

You can select a preset sound mode suitable to 
the music genre.

Available sound modes

FLAT

 (No sound mode is applied)

,

H.ROCK

(Hard rock)

,

R & B

 (Rhythm & blues)

, 

POP, JAZZ, DANCE, COUNTRY, REGGAE, 
CLASSIC, USER 1, USER 2, USER 3

•  When 

 appears on the display, you can 

move back to the previous display by pressing 
number button 3.

Continued on next page...