JVC KD-G437 - Инструкция по эксплуатации - Страница 21

ENGLISH

21

  To keep discs clean

A dirty disc may not play correctly. 
If a disc does become dirty, wipe it with 
a soft cloth in a straight line from center 
to edge.
•  Do not use any solvent (for example, conventional 

record cleaner, spray, thinner, benzine, etc.) to clean 
discs.

  To play new discs

New discs may have some rough spots 
around the inner and outer edges. If 
such a disc is used, this unit may reject 
the disc.
To remove these rough spots, rub the edges with a 
pencil or ball-point pen, etc.

Warped disc

Sticker

Sticker residue

Stick-on label

Do not use the following discs:

Unusual shape

Single CD (8 cm disc)

More about this unit

Basic operations 

Turning on the power

•  By pressing SRC on the unit, you can also turn on the 

power. If the source is ready, playback also starts.

Turning off the power

•  If you turn off the power while listening to a disc, disc 

play will start from where playback has been stopped 
previously, next time you turn on the power.

Tuner operations 

Storing stations in memory

•  During SSM search...
  –  All previously stored stations are erased and 

stations are stored newly.

  –  Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency).

  –  When SSM is over, the station stored in No. 1 will 

be automatically tuned in.

•  When storing a station manually, the previously 

preset station is erased when a new station is stored 
in the same preset number.

FM RDS operations

•  Network-Tracking Reception requires two types of 

RDS signals—PI (Programme Identification) and AF 
(Alternative Frequency) to work correctly. Without 
receiving these data correctly, Network-Tracking 
Reception will not operate correctly.

•  If a Traffic Announcement is received by TA Standby 

Reception, the volume level automatically changes to 
the preset level (TA VOL) if the current level is lower 
than the preset level.

•  When Alternative Frequency Reception is activated 

(with AF selected), Network-Tracking Reception is 
also activated automatically. On the other hand, 
Network-Tracking Reception cannot be deactivated 
without deactivating Alternative Frequency 
Reception. (See page 14.)

Continued on the next page