JVC KD-BT11 - Инструкция по эксплуатации - Страница 8

ENGLISH

8

  Storing your favorite programme 

types

You can store six favorite programme types.

Preset programme types in the number buttons 
(1 to 6):

1

  Select a PTY code (see page 7).

2

  Select the preset number (1 – 6) you want to 

store into.

3

  Repeat steps 1 and 2 to store other PTY codes 

into other preset numbers.

4

  Finish the procedure.

  Using the standby receptions

TA Standby Reception

TA Standby Reception allows the unit to switch 
temporarily to Traffic Announcement (TA) from any 
source other than AM and FM3.
The volume changes to the preset TA volume level if the 
current level is lower than the preset level (see
page 21).

Ex.: When “ROCK M” is selected

To activate TA Standby Reception

The TP (Traffic Programme) 
indicator either lights up or flashes.

•  If the TP indicator lights up, TA Standby Reception is 

activated.

•  If the TP indicator flashes, TA Standby Reception is 

not yet activated. (This occurs when you are listening 
to an FM station without the RDS signals required for 
TA Standby Reception.)

  To activate TA Standby Reception, tune in to another 

station providing these signals. The TP indicator will 
stop flashing and remain lit.

To deactivate the TA Standby Reception

The TP indicator goes off.

PTY Standby Reception

PTY Standby Reception allows the unit to switch 
temporarily to your favorite PTY programme from any 
source other than AM and FM3.

To activate and select your favorite PTY code for 
PTY Standby Reception,

 see page 21.

The PTY indicator either lights up or flashes.
•  If the PTY indicator lights up, PTY Standby Reception 

is activated.

•  If the PTY indicator flashes, PTY Standby Reception is 

not yet activated.

  To activate PTY Standby Reception, tune in to another 

station providing these signals. The PTY indicator will 
stop flashing and remain lit.

To deactivate the PTY Standby Reception,

 select 

“OFF” for the PTY code (see page 21). The PTY indicator 
goes off.