JVC KD-BT11 - Инструкция по эксплуатации - Страница 11

ENGLISH

11

OPERATIONS

  Connecting a Bluetooth device for 

the first time

Pairing and PIN code

When you connect a Bluetooth device to the unit 
for the first time, make pairing between the unit 
and the device. Pairing allows Bluetooth devices to 
communicate with each other.
To make pairing, you may need to enter the PIN 
(Personal Identification Number) code of your Bluetooth 
device you want to connect.

•  Once the connection is established, it is registered in 

the unit even if you reset the unit. Up to five devices 
can be registered in total.

•  Only one device for Bluetooth phone and one for 

Bluetooth audio can be connected at a time.

•  To use the Bluetooth function, you need to turn on 

Bluetooth function of the device.

Preparation:

 Operate the device to turn on its 

Bluetooth function.

1

  While listening to a source...

2

  Select “DEVICE.”

3

  Select “NEW PAIRING.”

Continued on the next page

4

  Enter a PIN (Personal Identification Number) 

code to the unit.

•  You can enter any number you like (1-digit to 

16-digit number). [Initial: 0000]

* 

Some devices have their own PIN code. Enter the 
specified PIN code to the unit.

1

  Move to the next (or previous) number 

position.

2

  Select a number.

3

  Repeat steps 

1

 and 

2

 until you finish 

entering a PIN code.

4

  Confirm the entry.

5

  Operate the target Bluetooth device, (while 

“WAIT PAIR” is flashing on the display).

On the device to be connected, enter the same PIN 
code you have just entered for this unit.

“PAIRING” flashes, then “PAIRING OK” appears on 
the display when the connection is established. 
Now you can use the device through the unit.

The device remains registered even after you 
disconnect the device. Use “

CNNCT PHONE

” or 

“

CNNCT AUDIO

” (or activate “

AUTO CNNCT

”) to 

connect the same device from next time on. (See 
pages 12 and 22.)