JVC KD-BT1 - Инструкция по эксплуатации - Страница 48

ENGLISH

48

Symptom

Remedy/Cause

USB device

•  Correct characters are not displayed (e.g. 

album name).

For available characters, see page 4.

•  While playing a track, sound is sometimes 

interrupted.

The tracks have not been properly copied into the USB 
device. Copy tracks again into the USB device, and try 
again.

•  The sound is interrupted or skipped during 

playback of a USB device.

•  Turn off, then turn on the unit.
•  (When the sound is not yet restored,) connect the device 

again.

Bluetooth

•  Bluetooth device does not detect the unit.

The unit can be connected with one Bluetooth cellular 
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected 
from another device. Disconnect currently connected 
device and search again.

•  The unit does not detect the Bluetooth device. •  Check the Bluetooth setting of the device.

•  Search from the Bluetooth device. After the device 

detects the unit, select “Open...” on the unit to connect 
the device. (See page 17.)

•  The unit does not make pairing with the 

Bluetooth device.

•  Enter the same PIN code for both the unit and target 

device. If the PIN code of the device is not indicated on 
its instructions, try “0000” or “1234.”

•  Select the device name from “Special Device,” then try to 

connect again. (See page 18.)

•  Try to pair/connect from the Bluetooth device.
•  Check if your Bluetooth device support the respective 

profile. (See page 16.)

•  Echo or noise occurs.

Adjust the microphone unit position.

•  Phone sound quality is poor.

•  Reduce the distance between the unit and the Bluetooth 

audio device.

•  Move the car to a place where you can get a better signal 

reception.

•  The sound is interrupted or skipped during 

playback of a Bluetooth audio device.

•  Reduce the distance between the unit and the Bluetooth 

audio device.

•  Disconnect the device connected for “Bluetooth Phone.”
•  Turn off, then turn on the unit.
•  (When the sound is not yet restored,) connect the device 

again.

•  The connected audio device cannot be 

controlled.

Check whether the connected audio device supports AVRCP 
(Audio Video Remote Control Profile).