JVC KD-AVX55 - Инструкция по эксплуатации - Страница 66

66

ENGLISH

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
•  For operations with the external components, refer also to the instructions supplied with the adapters used for the 

connections (as well as the instructions supplied with the external components).

•  Messages (enclosed in “ ”) in the tables below are shown in the language selected on <

Language

>. ( 

 15) 

Messages described here are in the language of this manual.

Symptom

Remedy/Cause

General

•  No sound comes out of the speakers. •  Adjust the volume to the optimum level.

•  Check the cords and connections.
•  DTS sound cannot be reproduced through any terminals 

(Speaker out/LINE OUT).

•  No sound comes out of the center 

speaker.

•  Center speaker is not activated. ( 

 17) Once you have reset 

the unit, make sure to activate the speaker again.

•  Center speaker is used only for surround playback. No sound 

comes out for stereo playback.

•  The screen is not clear and legible.

Sunshine from the windshield may cause this symptom.
Adjust <

Bright

>. ( 

 14)

•  “Mecha Error Push Reset” appears on 

the screen, and the panel does not 
move.

Reset the unit. ( 

 3)

•  “No Signal” appears.

•  Change the source.
•  Start the playback on the external component connected to 

VIDEO IN plug.

•  Check the cords and connections.
•  Signal input is too weak.

• 

 button on the monitor panel 

does not work.

When the monitor panel is open, the button does not function.

•  The unit does not work at all.

Reset the unit. ( 

 3)

•  The remote controller does not work. Deactivate Dual Zone. (  

 43) (While Dual Zone is activated, 

the remote controller only functions for operating the DVD/CD 
player.)

•  The touch panel does not respond 

properly.

•   <

Monitor/Sensor

> does not work 

properly.

•  Keep your hands and the touch panel clean and dry.
•  Eliminate static electricity and do not place conductors or any 

materials generating static electricity near the unit.

•   Leave the unit until the temperature becomes stable in the car.
•   A rubber mat on the floor may cause this symptom. In this case, 

do not use the rubber mat.