JVC KD-AVX55 - Инструкция по эксплуатации - Страница 24

24

ENGLISH

Menu item

Selectable setting/item

Fader/Balance
Fader

:

Adjust the front and rear 
speaker output balance.

Balance

:

Adjust the left and right 
speaker output balance.

♦

 F06 

to

 R06; 

Initial 

00 

(fader)

♦

 L06 

to

 R06; 

Initial 

00 

(balance)

[

5

/

∞

]

: Adjusts fader.

[

2

/

3

]

: Adjusts balance.

[

]

: Resets the adjustments.

•  When using a two-speaker system, set the fader to the center (

00

).

Volume Adjust 

*

1

Adjust and store the auto-adjustment volume level for each source, comparing 
to the FM volume level. The volume level will automatically increase or decrease 
when you change the source.
• <

Fix

> appears when an FM broadcast is selected as the source.

♦

 –12 

to

 +12

;

Initial 

00

Subwoofer Level 

You can adjust the output level of the subwoofer when it is activated.( 

 17)

♦

 –06 

to

 +08; 

Initial 

00

High Pass Filter

♦

 Through

♦

 On

:  Select when the subwoofer is not connected.
:  Select when the subwoofer is connected.

Crossover

Select the crossover frequency between the front/rear speakers and the 
subwoofer.

♦

 80Hz, 120Hz, 150Hz

Amplifier Gain 

*

2

You can change the maximum volume level of this unit.

♦

 Off

♦

 Low  Power

♦

 High  Power

:  Deactivates the built-in amplifier.
:  VOL 00 to 30 (Select this if the maximum power of the 

speakers is less than 50 W.)

:  VOL 00 to 50

Rear Speaker 

*

3

You can activate/deactivate the rear speakers.

♦

 Off,  On

*

1 

For “

DISC/USB

”: You can make the adjustments separately depending on the audio format—Dolby digital and 

the others.

*

2 

The volume level automatically changes to “30” if you change to <

Low Power

> with the volume level set higher 

than “30.”

*

3 

This setting takes effect only when Dual Zone is activated. ( 

 43)

Initial: 

Underlined

Dragging also makes 
adjustments.