JVC KD-AVX2 - Инструкция по эксплуатации - Страница 58

58

ENGLISH

Basic operations 

Turning on the power

•  By pressing SRC on the receiver, you can also 

turn on the power.

Selecting the sources

•  When no disc is loaded in the receiver and 

Dual Zone is off, “DISC” cannot be selected.

•  Without connecting to the CD changer or the 

DAB tuner, “CD-CH” or “DAB” cannot be 
selected.

Turning off the power

•  If you turn off the power while listening to a 

disc, disc play will start automatically, next 
time you turn on the power.

Tuner operations 

Storing stations in memory

• During SSM search...
  – All previously stored stations are erased and 

stations are stored newly.

  – Received stations are preset in No. 1 (lowest 

frequency) to No. 6 (highest frequency).

  – When SSM is over, the station stored in 

No. 1 will be automatically tuned in.

•  When storing a station manually, a previously 

preset station is erased when a new station is 
stored in the same preset number.

FM RDS operations

•  Network-Tracking Reception requires 

two types of RDS signals—PI (Programme 
Identification) and AF (Alternative 
Frequency) to work correctly. Without 
receiving these data correctly, Network-
Tracking Reception will not operate.

•  If a DAB tuner is connected and Alternative 

Frequency Reception for DAB services 
(DAB AF) is activated, Network-Tracking 
Reception (AF Regional) is also activated 
automatically. On the other hand, Network-
Tracking Reception cannot be deactivated 
without deactivating Alternative Frequency 
Reception. (See pages 17, 40, 44, 52.)

•  TA Standby Reception and PTY Standby 

Reception will be temporarily canceled while 
listening to an AM station.

Disc operations 

General

•  In this manual, words “track” and “file” are 

interchangeably used when referring to the 
music/picture/movie files and their file names.

•  This receiver can also play back 8 cm discs.
•  This receiver can only play back audio CD 

(CD-DA) files if different type of files are 
recorded in the same disc.

  – The first track will be skipped if a different 

type of file is detected first.

•  When a disc has been loaded, selecting 

“DISC” for the playback source starts disc 
play.

Changing the source

•  If you change the source, playback also stops 

(without ejecting the disc).

  Next time you select “DISC” for the playback 

source (without activating Dual Zone), disc 
play starts automatically.

Ejecting a disc

•  If the ejected disc is not removed within 

15 seconds, the disc is automatically inserted 
again into the loading slot to prevent it from 
dust. (Disc will not play this time.)

More about this receiver