JVC KD-AVX2 - Инструкция по эксплуатации - Страница 39

39

ENGLISH

Indications

Selectable settings, [reference page]

Disc  Setup 2

*

3

Speaker Level*

1

You can adjust the output level of each speaker monitoring 
the test tone.
Press and hold ENT to activate (or cancel) the test tone.
• 

Front Lch/Center ch/Front Rch/Rear Rch/
Subwoofer*

2

/Rear Lch

: 

adjust the output level of each 

speaker in the range of –10dB –+10dB. 

[Initial]; 00dB

Speaker Distance*

4

You can adjust the speaker output timing separately for each 
speaker according to the distance from the speakers to the 
listening position.
• 

Front Lch/Center ch/Front Rch/Rear Rch/Rear Lch

: 

adjust the speaker distance in the range of 15 cm to 600 cm 
in 15-cm step. 

  [Initial]; 120 cm (for center speaker), 150 cm (for the other 

speakers)

*

1

When activating the test tone, white noise comes out and cycles between the speakers activated on 
“Speaker Size” [38] for about 2 seconds each. Press 

5

 / 

∞

 repeatedly while the test tone comes out 

from the target speaker to adjust the settings (the test tone continues to come out from the target 
speaker during the adjustment).

*

2 

The setting is effective only when a multi-channel source is played back and Disc Surround is on, or 
when Dolby PLII Movie/Music is in effect. Adjust the level on “Subwoofer” [43] for other cases. 

*

3 

Selectable only when DISC is the source.

*

4

Unselectable when all the speakers other than front ones are deactivated on “Speaker Size” [38].

Adjusts the speaker level

Selects the speaker to adjust

Selects the speaker to adjust

Adjusts the speaker distance

Selects the speaker to adjust

Selects the speaker to adjust