Магнитолы Hyundai Electronics H-CMD7070 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
19
Radio Operation
1. PRESET STATION [ 1-6 ] BUTTONS
A). To memorize the current frequency, press any one of the six preset buttons (1-6) on the front panel or on the
remote controller and hold it for more than 2 seconds.
B). To recall the preset memory, press one of the preset buttons [1-6].
2. A.P BUTTON
When shortly pressing the A.P button on the front panel or the A/P button on the remote controller, the tuner begins
searching for preset radio stations. When the radio station with strong signal is found, the tuner stops searching and
holds on preset station for a few seconds, and then continues searching. Each FM band: FM 1, FM 2 and FM 3, - is
checked once a time.
When long pressing the A.P or A/P button (more than 1 second), the tuner begins searching from the current
frequency and checks the signal strength level until one cycle search is finished. And then the six strongest stations
are saved at the corresponding number. The auto search operation may be applied in the each band. When the AS
operation is finished, the tuner executes scanning preset radio stations.
3. BAND BUTTON
In RADIO mode, press BAND button on the remote controller or on the front panel several times to select desired
radio band and the band name will be displayed on LCD.
4. TUNE/SEEK UP/DOWN BUTTONS
Press UP or DN button on the remote controller or
>>/<<
button on the front panel to set up the desired radio station
manually. Press them and hold for more than 2 seconds to start automatically tuning for searching the stronger
stations.
