Hyundai Electronics H-CMD4031 - Инструкция по эксплуатации - Страница 13

12

13

Operation

Operation

by selecting mono mode, which may cut down 
some reception noise.

Local radio station search

Press repeatedly SELECT button on the panel 

or SEL button on the RC until the display shows 
LOC ON (LOC OFF). Press VOL+/VOL- buttons 
on the RC or rotate VOLUME regulator on the 
panel to select between LOC ON/OFF. LOC ON 
means that only local stations are received; LOC 
OFF means that both local and distant stations 
with weak and strong signal are received. 
Or press LOCAL button on the RC to switch 
between local and distant station reception.

RDS function

RDS (Radio Data System) service availability 

varies with areas. Please understand if RDS 
service is not available in you area, the 
following service is not available, either.

AF (Alternative Frequencies) 

function

Press AF button on the panel to turn the AF 

function on or off. When the function is on, AF 
symbol will blink on the display.

When the radio signal strength is poor, 

enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with a stronger signal, so that you 
do not have to retune the stations when driving 
between different transmitter coverage areas.

PS (Program Service name): the name of 

station will be display instead of frequency.

If RDS service is not available in your area, 

turn off the AF mode.

TA (Traffic Alarm) function

Press TA button to turn TA function on or 

off. When on, the TA symbol will show on the 
display.

In TA mode traffic program will be 

automatically searched, until the program 
is received. When traffic announcement is 
received the unit will temporarily switch to the 

tuner mode (regardless of the current mode) 
and begin broadcasting the announcement. 
After the traffic announcement is over, it will 
return to the previous mode and volume level. 
To interrupt traffic announcement press TA 
button shortly; it will not switch off the TA mode.

PTY (Program Type)

This radio will allow you to select the type of 

program required, and will search for a station 
broadcasting that type of program.

Press PTY/PLAY/PAUSE button to show the 

music type. Then press 1 - 6 number buttons 
to choose different music programs available.

Press PTY/PLAY/PAUSE button twice to 

show the speech type program. Then press 1 
- 6 number buttons to choose different speech 
programs. Each number button will show 2 or 
3 different speech programs for you to choose: 
Pop, Rock, Easy, Light, Classics, Other, Jazz, 
Country, Nation, Oldies, Folk, News, Affairs, 
Info, Sport, Educate, Drama, Culture, Science, 
Varied, Weather, Finance, Children, Social, 
Religion, Phone IN, Travel, Leisure, Document).

When PTY is selected, the radio starts to 

search corresponding PTY information, and 
stops if the corresponding PTY information 
is detected. If no buttons are pressed within 
several seconds, previously selected PTY is 
searched. During 1 loop, if desired PTY is not 
found, the unit will return to previous mode. 
Press PTY/PLAY/PAUSE button for the 3rd 
time to switch the PTY function off.

Other parameter setting

To choose the corresponding parameter, 

press and hold SELECT button on the panel or 
SEL button on the RC, then press it repeatedly 
until the display shows the needed parameter. 
Press VOL+/VOL- buttons on the RC or rotate 
VOLUME regulator on the panel to choose the 
needed option. After choosing, please leave 
the unit idle to activate.

•  TA ALARM/TA SEEK: In TA SEEK mode, 

the unit will seek for traffic announcement 
program; in TA ALARM mode the alarm is set