Hyundai Electronics H-CMD4031 - Инструкция по эксплуатации - Страница 11

11

Operation

Press VOL+/VOL- buttons on the RC or rotate 
VOLUME regulator on the panel to adjust the 
selected item. Balance is to adjust the balance 
between the left and right speakers. Fader is to 
adjust the balance between the rear and front 
speakers. After you have reached your desired 
effect, leave the unit idle in order for the new 
setting to take effect.

  If the equalizer is set on, bass and treble 

are not adjustable.

EQ modes

Press repeatedly SELECT button on the panel 

or SEL button on the RC until the display shows 
EQ OFF. Press VOL+/VOL- buttons on the RC 
or rotate VOLUME regulator on the panel to 
choose an equalizer effect: POP => ROCK => 
CLASS => FLAT => EQ OFF. After you have 
reached your desired effect, leave the unit idle in 
order for the new setting to take effect.

Loudness

Press repeatedly SELECT button on the 

panel or SEL button on the RC until the display 
shows LOUD ON (LOUD OFF). Press VOL+/
VOL- buttons on the RC or rotate VOLUME 
regulator on the panel to select between 
LOUD ON/LOUD OFF. LOUD function is to 
emphasize the bass output; the word LOUD 
ON indicates that the LOUD mode is on.

Clock setting

Press CLK button on the panel to show the 

time on the display. Press and hold it, the hour 
will be in green. Rotate VOLUME regulator on 
the panel or press VOL+/VOL- buttons on the RC 
to adjust the hour. Press SEL button on the RC 
or SELECT button on the panel, the minute will 
be in green. Rotate VOLUME regulator on the 
panel or press VOL+/VOL- buttons on the RC to 
adjust minutes. Press CLK button to confirm.

Beep

Press repeatedly SELECT button on the 

panel or SEL button on the RC until the display 
shows BEEP ON (BEEP OFF). Press VOL+/

General operations

Reset the unit

Operating the unit for the first time or after 

replacing the car battery, you must reset the 
unit. Press RESET button (hole) with a pointed 
object, such as a ballpoint pen, to set the unit 
to initial state.

  When some errors occur, you can also 

press RESET button to resume to normal, and 
it will erase some memorized functions.

Turning the unit on/off

Press any button on the panel or the RC 

(except OPEN button) to turn on the unit. Press 
and hold POWER/TFT OFF button on the 
panel or press POWER button on the RC to 
turn off the unit.

Mode selection

Repeatedly press MOD/MUT button on the 

panel or MODE button on the RC to select a 
mode: Radio => Disc => USB => Memory card 
=> AUX.

  The Disc, Card and USB modes are 

only available when corresponding storages 
are connected to the unit.

Mute function

Press MUTE button on the RC or press and 

hold MOD/MUT button on the panel to turn off 
the sound. “MUTE ON” appears on the display. 
Press the button again or adjust volume to 
resume the sound output.

Volume control

Press VOL+/VOL- buttons on the RC or 

rotate VOLUME regulator on the panel to 
decrease or increase sound volume level.

Setting the sound characteristics

Press repeatedly SELECT button on the 

panel or SEL button on the RC to select the 
audio setting: VOL (volume) => BAS (bass) => 
TRE (treble) => BAL (balance) => FAD (fader).