Hyundai Electronics H-CMD4029 - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

Manual/automatic tuning

Manual tuning: To find a station, select a 

band first, then press and hold 

/

 buttons 

on the RC until MANUAL appears on the display 
or press SEEK+/SEEK- to enter manual tuning, 
then press these buttons repeatedly to search 
for the needed frequency upward or downward.

Automatic tuning: To find a station, select a 

band first, then press and hold 

/

 buttons 

on the panel or press 

/

 buttons on the 

RC, the automatic downward/upward search 
will start. It will play when a station is found.

Programming preset stations

•   To store a station: Select a band (if 

needed); find a station by manual/automatic 
tuning. Then press MEM button and rotate 
VOLUME knob to choose a memory position 
(1-6), and finally press OK button to confirm. 
Or, after finding a station, press and hold a 
number button (1-6) on the RC to save the 
station in the corresponding memory position.

•   To recall a station: Select a band (if 

needed); Press 

/

 buttons on the panel. 

Or press a number button (1-6) on the RC to call 
the station saved in the corresponding position.

Auto memory store

Select a band, press and hold RPT/P.SCAN 

button on the RC to enter auto store mode. 
The radio will automatically store 6 stations to 
the 6 preset memories of the current band. To 
stop auto store, press this button again.

  During auto station preset, the unit will 

search and store stations with the strong signal 
first, and then weaker signal stations until the 
memories are full.

Preset scan

Select a band, press RPT/P.SCAN button 

on the RC to scan all preset stations in the 
memories of the current band, each preset 
scan for 5 seconds. To stop preset scan, press 
the button again.

RDS function

RDS (Radio Data System) service availability 

varies with areas. Please understand if RDS 
service is not available in you area, the 
following service is not available, either.

AF (Alternative Frequencies) 

function

Press and hold AF/TA button on the RC to 

turn on AF function. If the AF function is on, the 
display will show “AF”.

When the radio signal strength is poor, 

enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength, so that 
you do not have to retune the stations when 
driving between different transmitter coverage 
areas. When AF symbol is on, it means RDS 
information is received; when AF symbol is 
flashing, it means RDS information is not yet 
received. If RDS service is not available in your 
area, turn off the AF mode.

TA (Travel Announcement) / TP 

(Travel Program Identification)

Enable or disable TA mode by pressing 

and holding OK button on the front panel or 
by pressing AF/TA button on the RC. Default 
setting is OFF.

When TA function is activated, it will search 

the station with TA information automatically. 
If there is no TA information, it will search the 
station with TP information automatically, if 
there is no TP information either, it will return to 
the previous station after searching.

When receiving the station with TP 

information but without TA information, 
TP icon is on and TA icon keeps blinking; 
when receiving the station with TP and TA 
information, both TP and TA icons are on.

When playing in other mode and TA 

information is received, it will change to the 
radio mode automatically. After playing over, it 
will return to the previous mode. To ignore the 
TA information, press AF/TA button on the RC 
or press and hold OK button on the panel.