Hyundai Electronics H-CMD4029 - Инструкция по эксплуатации - Страница 11

11

Operation

RDS SETUP (available in Radio, Disc, USB 

and Card modes):

TA: Seek/Alarm. In TA SEEK mode, the unit 

will seek for traffic announcement program 
when TA is pressed; in TA ALARM mode, no 
TA/TP is displayed and the alarm is set off.

PI: Mute/Sound. PI sound refers to the 

reception noise when the AF function tries to 
scan alternative frequency.

RETUNE: Long/Short. RETUNE refers to the 

time period the unit allows for radio scan when 
reception is interrupted. “S” represents a time 
period of 30 seconds and “L” represents a time 
period of 90 seconds.

MASK: DPI/ALL. During MASK DPI mode, 

the unit will mask only the AF which has 
different PI, this is the default mode; during 
MASK ALL mode, the unit will mask the AF 
which has different PI and no RDS signal with 
high field strength.

EON TA: DX/Local. If you want to receive 

information from local stations only, select 
EON TA LOC mode. Otherwise, select EON 
TA DX mode.

REG : REG ON (the receiver accepts 

regional variants of the tuned station with REG 
icon turned on), and REG OFF (the receiver 
ignores regional variants).

TA VOL: Adjust level of TA volume, support 

50 levels. Default level is 0.

EXPERT (available in Radio, Disc, USB and 

Card modes):

DX: Set radio station search by DX or 

LOCAL mode. When the LOCAL function is 
on, the local stations (stations with weak radio 
signal) can be played. When DX is on, both 
local and distant stations (stations with strong 
radio signal) can be played.

Stereo: Set radio reception at STEREO or 

MONO mode. Improvement of reception of 
distant stations can be done by selecting mono 
mode, which may cut down some reception 
noise. To select stereo or mono you can also 
press STEREO/MONO button on the RC.

Beep: BEEP ALL (beep sound will be heard 

when buttons are pressed), BEEP 2ND (beep 

sound will be heard when buttons are pressed 
and held) and BEEP OFF (no beep sound for 
button pressing).

Loud: Set loudness on or off. LOUD function 

is to emphasize the bass output.

Backlight: Set OSD backlight: MID => HIGH 

=> LOW.

OSD color: Set OSD color: Dark Blue => 

Violet => Light blue.

CLOCK (available in Radio, Disc, USB and 

Card modes):

Clock: Select ON to show the current time 

on the display.

Clock hour: Set 12-/24-hour time mode.
Clock adjust: Set the current time.

Mode setting

Press MODE button to select between unit 

operation modes: TUNER => Disc => USB => 
Card => AUX.

  Disc, USB and CARD modes will only 

show on the display when a disc, a USB device 
or a memory card is inserted into the unit.

AUX jack

AUX-in jack is intended for connecting an 

external audio or video equipment to amplify 
the sound. If connection is made correctly, the 
audio signal from the external source will be 
translated through the acoustics of the head 
unit. This enables to adjust the volume and 
quality of the sounding. For example, you can 
connect an MP3-player to listen to tracks using 
the car acoustic system.

Radio operations

Band selection

Press repeatedly BAND button on the panel 

or RDM/BAND button on the RC to select your 
desired radio band in RADIO mode: FM1, FM2, 
FM3 (OIRT), MW. In each set of the bands you 
can store up to 6 preset stations, making total 
24 preset memory stations.