Hyundai Electronics H-CMD4029 - Инструкция по эксплуатации - Страница 10

10

Operation

Setting other characteristics

•  Press MENU button to enter the setting 

mode.

•  In the menu press UP/DOWN cursor 

buttons on the RC or rotate VOLUME knob 
on the panel to select a setting page. Press 
ENTER button or LEFT cursor button on the 
RC or press OK button on the panel to go to 
the selected page.

•  In the selected page press UP/DOWN 

cursor buttons on the RC or rotate VOLUME 
knob on the panel to select a setting. Press 
ENTER button on the RC or OK button on the 
panel to adjust the selected setting.

•  After you performed the adjustment, press 

MENU button to return to the setting page. 
Press MENU button again to quit setting menu.

•  Following setting pages are available:

AUDIO (available in Radio, Disc, USB and 

Card modes):

Bass: support 10 levels. Default level is 0.
Treble:  support 10 levels. Default level is 0.
Balance: support 10 levels for each left and 

right channel. Default is left equal to right.

Fader:  support 10 levels for each front and 

rear channel. Default is front equal to rear.

EQ: DSP OFF => FLAT => CLASSICS => 

POP => ROCK.

PICTURE (available in Disc, USB and Card 

mode):

Red: Adjust level of red color. Support 50 

levels. Default level is 25.

Green: Adjust level of green color. Support 

50 levels. Default level is 25.

Blue: Adjust level of blue color. Support 50 

levels. Default level is 25.

Brightness: Support 50 levels. Default level 

is 25.

Contrast: Support 50 levels. Default level is 25.
Sharpness: Support 15 levels. Default level 

is 10.

Screen: Adjust screen size: 16:9 - 4:3 - FULL.
Color reset: Resume color default status. 

(Select YES or NO by cursor buttons, and 
press OK or ENTER button).

General operations

Turning on/off

Press any button (except OPEN button) to 

turn on the unit. Press and hold PWR/MUTE 
button on the panel or POWER button on the 
RC to switch the unit off.

  After the unit is off, the volume level 

and radio current settings will be memorized, 
and when you turn the unit on it will resume 
the stored status you previously set. To protect 
your ear from too loud sound, the unit volume 
level will turn to 20 automatically when you 
turn the unit on if currect volume level setting is 
above 20 when your turn the unit off.

Volume control

Rotate VOLUME regulator or press VOL+/

VOL- buttons on the RC to adjust the volume 
level.

Mute function

Press PWR/MUTE button on the panel or 

MUTE button on the RC to turn the sound off. 
Press it again or adjust the volume to turn the 
sound on.

Setting the sound characteristics

•  Press SEL button on the RC to enter the 

audio setting menu consisting of following items: 
Bass =>Treble => Balance => Fader => EQ.

•  Press UP/DOWN cursor buttons on the 

RC or rotate VOLUME regulator on the panel 
to select a setting. Press ENTER button on the 
RC or OK button on the panel to confrim the 
selected setting. Press LEFT/RIGHT cursor 
buttons on the RC or rotate VOLUME regulator 
on the panel to adjust the setting.

•  Press SEL button again to confirm and 

return to current mode.

  If turning off the power all the settings of 

each mode will be saved. If turning off the ACC 
power all the settings will reset to default values. 
If you don’t adjust setting within several seconds 
after selecting the desired setting, the unit will 
automatically return to the current mode.