Hyundai Electronics H-CMD2009G - Инструкция по эксплуатации - Страница 16

16

Operation

not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Touch TA button on the screen or press 

and hold AF/TA button on the RC or press AF/
TA button on the panel to switch on the TA 
function. When TA is on, the TA displays on 
TFT, or else, if there is no TP information, the 
mode will search TP station automatically. 
When TA is playing, the volume will be adjusted 
to a TA level automatically. When other modes 
are activated (such as DVD, AUX), if a TA 
program is played the mode will skip to the 
RDS mode automatically. It will resume to the 
primary mode after the TA is over.

Program type (PTY)

Press PTY button on the RC to activate 

the PTY function, press it repeatedly to show 
Music group/Speech group/PTY off. Choose 
the needed PTY type by pressing the icon 
in the touchable screen or pressing the 
corresponding number buttons on the RC. 
When PTY search is on, and the selected type 
matches, PTY information is displayed. If PTY 
code is different or not available, PTY NONE 
icon will blinks, PTY engaging automatically 
exit to normal mode.

TV tuner operation

Connect a TV antenna to the TV antenna 

jack of the unit. Select TV mode, then touch 
the center of the display; following interface will 
be displayed:

1

2

3

4

5

6

by step.

•  Automatic tuning: press 

/

 buttons 

on the panel or SEEK-/

 and SEEK+/

 on 

the RC, the automatic search will start. It will 
play when finds the station.

Programming tuner stations

There are 6 numbered preset buttons on 

the RC, with which you can store and recall 
stations for each band (18 FM, 12 MW). Select 
a station, then press and hold a preset button. 
The station will be saved in the memory under 
the corresponding number. To recall a stored 
station, press the corresponding preset button.

Auto memory store/Preset scan

Auto store: Select a band, press and hold 

P.SCN/RPT button on the RC to enter auto 
store mode. The radio will automatically store 6 
stations to the 6 preset memories of the current 
band. To stop auto store, press the button again.

  During auto station preset, the unit will 

search and store stations with the strong signal 
first, and then weaker signal stations until the 
memories are full.

Preset scan: Select a band, press P.SCN/

RPT button on the RC to scan all preset 
stations in the memories of the current band. 
To stop preset scan, press the button again.

RDS background

RDS service availability varies with areas. 

Please understand if RDS service is not 
available in you area, the following service is 
not available.

AF (Alternative frequencies) function

Press and hold AF/TA button on the panel 

or press AF/TA button on the RC to enable AF 
function. When the radio signal strength is poor, 
enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength.

  AF indicator on the display will flash until 

RDS information is received. If RDS service is