Hyundai Electronics H-CMD2007 - Инструкция по эксплуатации - Страница 15

15

Operation

mode. Stereo reception is on when MONO 
disappears on the display. It is switched to 
mono mode when MONO appears. When the 
received stereo signal is weak, switch to mono 
mode to improve the signal.

 The function is available only in FM bands.

Scanning/memorizing stations 

automatically

In radio mode, you can press AMS/MENU 

button on the RC or AMS button on the monitor 
to scan for several seconds each station stored 
under number buttons (1 – 6).

You can press the corresponding number 

buttons, AMS/MENU button on the RC or 
AMS button on the monitor when your desired 
station is on. And it starts playing that station.

Press and hold AMS/MENU button on 

the RC or AMS button on the monitor; it will 
activate automatic storing function. The tuner 
automatically selects a station and stores it 
under number buttons (1 – 6).

To store a station press and hold number 

button for more than 2 seconds when listening.

  The unit can be stored up to 6 stations 

for each subband.

On-screen display

In radio mode, press and hold OSD button on 

the RC to display the version and current clock.

Goto FREQ

Press GOTO button, and the monitor shows 

FREQ. Then press number buttons to input the 
needed frequency. The unit will go to the input 
frequency.

  this function is only available when 

GOTO FREQ is set to ON in System 
adjustment menu.

RDS background

RDS service availability varies with areas. 

Please understand if RDS service is not 
available in you area, the following service is 
not available.

RDS touchable user interface

1

2

3

4 5

6

7

1. During PTY ON, touch this button to search 

the station with the selected program type.

2. PTY. Touch it to set PTY function ON or 

OFF.

3. UP/DOWN arrows. Touch it to select 

program type.

4. ТА button. Touch it to set TA function ON/

OFF.

5. AF button. Touch it to set AF function ON/

OFF.

6. SEEK+/- buttons. Touch to tune 

automatically.

7. BACK button: Touch to go to Radio 

interface.

AF (Alternative frequencies) function

Briefly press AF/EQ button on the RC to 

enable AF function. When the radio signal 
strength is poor, enabling the AF function 
will allow the unit to automatically search 
another station with the same PI (Program 
Identification) as the current station but with 
stronger signal strength.

  AF indicator on the display will flash until 

RDS information is received. If RDS service is 
not available in your area, turn off the AF mode.

TA (Traffic alarm) function

Briefly press TA/LOUD button to activate