Hyundai Electronics H-CDM8093 - Инструкция по эксплуатации - Страница 9

8

9

Operation

Operation

General operations

Turning on/off

Press any button (except OPEN and EJECT 

button) to turn the unit on. The display will 
show a message WELCOME to indicate it is 
ready to use. Press and hold POWER button to 
turn the unit off.

Mode selecting

Press MOD/MUT button to select between 

AUX, TUNER, S-CDP (disc), USB and SD/
MMC modes.

  Disc, USB and memory card modes 

can be selected only if corresponding device is 
loaded into the unit.

Volume control

The volume level can be adjusted at any 

time by rotating VOLUME knob.

Mute function

Press and hold MOD/MUT button to cancel 

the sound. Press it again or change the volume 
level to resume the sound.

Audio parameter setting

Press SEL button to select bass, treble, 

balance or fader mode. The corresponding 
word appears on the display. Rotate VOLUME 
knob to adjust the selected parameter. Balance 
is to adjust the balance between the left and 
right speakers. Fader is to adjust the balance 
between the rear and front speakers. After you 
have reached your desired effect, leave the unit 
idle in order for the new setting to take effect.

Beep

Press SEL button repeatedly until the display 

show BEEP ON; rotate VOLUME knob to 
toggle between BEEP ON (beep sound will be 
heard when buttons are pressed) and BEEP 
OFF, then leave the unit idle for the new setting 
to take effect.

EQ modes

Press SEL button repeatedly until the display 

show EQ OFF. Rotate VOLUME knob to 
choose an equalizer effect: POP => ROCK => 
CLASS => FLAT => EQ OFF. After you have 
reached your desired effect, leave the unit idle 
in order for the new setting to take effect.

Loudness

Press SEL button repeatedly until the 

display shows LOUD ON (LOUD OFF). Rotate 
VOLUME knob to select between LOUD ON/
LOUD OFF. LOUD function is to emphasize 
the bass output; the word LOUD ON indicates 
that the LOUD mode is on.

Clock setting

The clock can be set anytime when the 

power is on. Press PTY/CLK button (in radio 
mode - press and hold the button) and then 
press and hold the button for 2 seconds, the 
time indication will blink on the display. Rotate 
VOLUME knob to adjust hours. Press SEL 
button to go to minute setting. Rotate VOLUME 
knob to adjust minutes. Press PTY/CLK button 
again or leave the unit idle for the new setting 
to take effect.

Press PTY/CLK button (in radio mode press 

and hold the button) to view the time display.

AUX in jack

AUX-in jack is intended for connecting an 

external audio or video equipment to amplify 
the sound. If connection is made correctly, the 
audio signal from the external source will be 
translated through the acoustics of the head 
unit. This enables to adjust the volume and 
quality of the sounding. For example, you can 
connect an MP3-player to listen to tracks using 
the car acoustic system.

Radio operations

Band select

Press BND/ID3 button repeatedly to select