Hyundai Electronics H-CCR8189M - Инструкция по эксплуатации - Страница 11

11

Operation

AF (Alternative Frequencies) 

function

Press MUSIC/AF button on the RC or press 

and hold   button on the panel to turn on AF 
function. If the AF function is on, the display will 
show “AF”.

When the radio signal strength is poor, 

enabling the AF function will allow the unit to 
automatically search another station with the 
same PI (Program Identification) as the current 
station but with stronger signal strength, so that 
you do not have to retune the stations when 
driving between different transmitter coverage 
areas. When AF symbol is on, it means RDS 
information is received; when AF symbol is 
flashing, it means RDS information is not yet 
received. If RDS service is not available in your 
area, turn off the AF mode.

TA (Travel Announcement) / TP 

(Travel Program Identification)

Enable or disable TA mode by pressing 

and holding MOVIE/TA button on the RC or   
button on the panel. Default setting is OFF.

When TA function is activated, it will search 

the station with TA information automatically. 
If there is no TA information, it will search the 
station with TP information automatically, if 
there is no TP information either, it will return to 
the previous station after searching.

When receiving the station with TP 

information but without TA information, 
TP icon is on and TA icon keeps blinking; 
when receiving the station with TP and TA 
information, both TP and TA icons are on.

When playing in other mode and TA 

information is received, it will change to the 
radio mode automatically. After playing over, it 
will return to the previous mode. 

PTY (Program Type) (for FM radio)

This radio will allow you to select the type of 

program required, and will search for a station 
broadcasting that type of program.

Press and hold PHOTO/PTY button on 

the RC or   button on the panel to show the 
various program type lists. Rotate the volume 
knob or press VOL+/- buttons on the RC to 
select the needed program type. 

When PTY is selected, the radio starts to 

search corresponding PTY information, and 
stops if the corresponding PTY information 
is detected. If no buttons are pressed within 
several seconds, previously selected PTY is 
searched. During 1 loop, if desired PTY is not 
found, the unit will return to previous mode. 
Press and hold PHOTO/PTY button on the RC 
or   button on the panel to switch the PTY 
function off.

USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 2.0. Capacity: up to 

32 Gb.

For correct and satisfactory operation, 

licensed SD/MMC memory cards of famous 
brands should be used with this unit. Avoid 
using memory cards of unknown brands. 
Capacity: up to 32 Gb.

According to the USB 1.1/2.0 Standard, 

usage of a USB device with power current 
consumption exceeding 500 mA is not 
recommended without supplementary power 
supply. Failure to use supplementary power for 
connected USB drives with power consumption 
exceeding this value as well as defective 
USB drives may cause mechanical or thermal 
changes of elements of this unit as well as 
failure of internal elements of the USB port. 
Such damages are not warrantee cases.

Warning: usage of external USB drives 

containing BIN files in the root directory may 
cause malfunction of the unit or damage to the 
software.

Inserting an SD/MMC card/USB device

Open the front panel and insert an SD/

MMC memory card into the card slot. Open the 
USB slot cover on the front panel and insert