Hyundai Electronics H-CCR8099 - Инструкция по эксплуатации - Страница 13

Operation

13

(regardless of the current mode) and 
begin broadcasting the announcement. 
After the traffic announcement is over, 
it will return to the previous mode 
and volume level. To interrupt traffic 
announcement press MOD/TA button 
shortly; it will not switch off the TA 
mode.

PTY (Program Type)

This radio will allow you to select 

the type of program required, and will 
search for a station broadcasting that 
type of program. 

Press and hold BND/PTY button on 

the panel or PTY button on the RC to 
show the music type. Then press 1 - 6 
number buttons to choose different 
music programs available.

Press and hold BND/PTY button 

on the panel or PTY button on the RC 
twice to show the speech type. Then 
press 1 - 6 number buttons to choose 
different speech programs. Each 
number button will show 3 different 
speech programs for you to choose 
(see table below).

Button

Music group

Speech group

1

Pop, Rock

News, Affairs, 
Info

2

Easy, Light

Sport, Educate, 
Drama

3

Classics

Culture, 
Science, Varied

4

Jazz, 
Country

Weather, 
Finance, 
Children

5

Nation, 
Oldies

Social, 
Religion, 
Phone IN

6

Folk

Travel, Leisure, 
Document

When PTY is selected, the radio 

starts to search corresponding 
PTY information, and stops if the 
corresponding PTY information is 
detected. If no buttons are pressed 
within several seconds, previously 
selected PTY is searched. If desired 
PTY is not found, the unit will return 
to previous mode. Press PTY/CLK 
button on the panel or PTY button on 
the RC to switch the PTY function off.

Other parameter setting

To choose the corresponding option, 

press and hold SELECT button on the 
panel or SEL button on the RC for 2 
seconds, then press it repeatedly until 
the display shows the needed option. 
Turn VOLUME knob or press VOL+/
VOL- buttons on the RC to choose the 
needed value. After choosing, leave 
the unit idle to activate.

TA SEEK/TA ALARM
In TA SEEK mode, the unit will seek 

for traffic announcement program 
when TA button is pressed; in TA 
ALARM the unit does not retune to TA 
information.

PI SOUND/PI MUTE
PI sound refers to the reception 

noise when the AF function tries to 
scan alternative frequency.

MASK DPI/MASK ALL
During MASK DPI mode, the unit 

will mask only the AF which has 
different PI, this is the default mode; 
during MASK ALL mode, the unit 
will mask the AF which has different 
PI and no RDS signal with high field 
strength.