Hyundai Electronics H-CCR8099 - Инструкция по эксплуатации - Страница 11

Operation

11

sound.

Loudness

Press SELECT button on the panel 

or SEL button on the RC repeatedly 
until LOUD ON (OFF) is displayed. 
Rotate VOLUME knob or press VOL+/
VOL- buttons on the RC to select 
loudness ON or OFF. Activating this 
feature will enhance bass and treble 
frequencies when listening to music at 
low volumes.

Audio parameter setting

Press SELECT button on the panel 

or SEL button on the RC repeatedly 
to select a parameter: VOL (volume) 
=> BAS (bass) => TRE (treble) => 
BAL (balance) => FAD (fader). Rotate 
VOLUME knob or press VOL+/VOL- 
buttons on the RC to adjust each mode:

•  Bass/Treble: from -10 to 10;
•  Balance: L10 (left) to R10 (right);
•  Fader: from R10 (rear) to F10 

(front).

  When DSP is on, bass and 

treble are not adjustable.

Preset EQ modes

Press SELECT button on the panel 

or SEL button on the RC repeatedly 
until EQ OFF is displayed. Rotate 
VOLUME knob or press VOL+/VOL- 
buttons on the RC to select between 
FLAT/CLASS/ROCK/POP and OFF 
equalizer modes.

Beep function

Press SELECT button on the panel 

or SEL button on the RC repeatedly 
until BEEP ON (OFF) is displayed. 
Rotate VOLUME knob or press VOL+/
VOL- buttons on the RC to select 

between ON (beep sound is heard 
when a button is pressed) and OFF 
(no sound is heard when a button is 
pressed).

Clock

Press and hold BND/PTY button 

on the panel or CLK button on the 
RC to display the time on the screen. 
Then press and hold this button again; 
the time indication will blink. Rotate 
VOLUME knob or press VOL+/VOL- 
buttons on the RC to adjust hours or 
minutes. To confirm the adjustment, 
press BND/PTY button on the panel 
or CLK button on the RC or leave the 
unit idle for several seconds.

Aux In

AUX-in jack is intended for 

connecting an external audio 
equipment to amplify the sound. If 
connection is made correctly, the 
audio signal from the external source 
will be translated through the acoustics 
of the head unit. This enables to 
adjust the volume and quality of the 
sounding. For example, you can 
connect an MP3-player to listen to 
tracks using the car acoustic system.

Radio operations

Band select

In Radio mode press BND/PTY 

button on the panel or BND button on 
the RC to select a radio band: FM1, 
FM2, FM3 and AM1, AM2. 6 stations 
can be saved in each band.