Hyundai Electronics H-CCR8089 - Инструкция по эксплуатации - Страница 12

12

13

Operation

Operation

driving between different transmitter coverage 
areas. When AF symbol is on, it means RDS 
information is received; when AF symbol is 
flashing, it means RDS information is not yet 
received. If RDS service is not available in your 
area, turn off the AF mode.

TA (Travel Announcement) / TP 

(Travel Program Identification)

Enable or disable TA mode by pressing 

and holding AF/TA button on the RC. Default 
setting is OFF.

When TA function is activated, it will search 

the station with TA information automatically. 
If there is no TA information, it will search the 
station with TP information automatically, if 
there is no TP information either, it will return to 
the previous station after searching.

When receiving the station with TP 

information but without TA information, 
TP icon is on and TA icon keeps blinking; 
when receiving the station with TP and TA 
information, both TP and TA icons are on.

When playing in other mode and TA 

information is received, it will change to the 
radio mode automatically. After playing over, it 
will return to the previous mode. To ignore the 
TA information, press AF/TA button on the RC 
or press and hold OK button on the panel.

PTY (Program Type) (for FM radio)

This radio will allow you to select the type of 

program required, and will search for a station 
broadcasting that type of program.

Press PTY/PROG button on the RC 

repeatedly to show the various program type 
lists. In each list, press 1 - 6 number buttons to 
choose different programs available.

When PTY is selected, the radio starts to 

search corresponding PTY information, and 
stops if the corresponding PTY information 
is detected. If no buttons are pressed within 
several seconds, previously selected PTY is 
searched. During 1 loop, if desired PTY is not 
found, the unit will return to previous mode. 
Press PTY/PROG button on the RC to switch 
the PTY function off.

USB/SD/MMC operations

USB/SD/MMC notes

USB format supports 2.0. Capacity: up to 8 

Gb.

For correct and satisfactory operation, 

licensed SD/MMC memory cards of famous 
brands should be used with this unit. Avoid 
using memory cards of unknown brands. 
Capacity: up to 8 Gb.

Inserting an SD/MMC card/USB device

Open the front panel and insert an SD/

MMC memory card into the card slot. Open the 
USB slot cover on the front panel and insert 
a USB into the USB slot. Then the playing 
mode will be changed into Card or USB mode 
automatically. The first card/USB device track 
playback will start.

  When SD/MMC card and USB device are 

both inserted, the playing mode will be changed 
into the mode of the device inserted later.

Play/pause

The unit will automatically play from the 

first sound track recorded on a SD/MMC/USB 
device. To ensure good system performance, 
wait until the unit finishes reading the device 
information before proceeding. Press 

 button 

on the RC to pause playback, press it again to 
resume playback.

MP3/DivX/JPEG file playback

When you insert a storage containing MP3/

DivX/JPEG file, the screen will show following 
interface: