Metabo STEB 65 Quick - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

Original Instructions

We, being solely responsible: Hereby declare that 

these jigsaws, identified by type and serial number 

*1), meet all relevant requirements of directives *2) 

and standards *3). Technical documents for *4) - 

see page 3.

The machine is suitable for sawing non-ferrous 

metals and sheet steel, wood and similar materials, 

plastics and similar materials. Any other use is not 

permitted.
The user bears sole responsibility for any damage 

caused by inappropriate use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your power tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating 

instructions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety 

warnings and instructions may result in electric 

shock, fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your power tool only together with these 

documents.

Hold power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring.

 A cutting accessory contacting a "live" wire 

may make exposed metal parts of the power tool 

"live" and could give the operator an electric shock.
Ensure that the place where you wish to work is free 

of power cables, gas lines or water pipes (e.g. 

check using a metal detector).
During work, the workpiece must lay flat and be 

secured against moving, e.g. using clamps.
Do not try to saw extremely small workpieces.
When sawing, the footplate must make secure 

contact with the workpiece.
When interrupting a cut for any reason, release the 

trigger and hold the saw motionless in the material 

until the saw blade comes to a complete stop. Never 

attempt to remove the saw from the workpiece while 

the saw blade is in motion or kickback may occur. 

Do not switch the machine on while the saw blade is 

touching the workpiece. Let the saw blade reach full 

speed before making a cut.
When restarting a saw in the workpiece, centre the 

saw blade in the kerf and check that saw teeth are 

not engaged into the material. If the saw blade 

seizes, it may kickback from the workpiece when 

the saw is restarted.
Keep hands well away from the sawing area and the 

saw blade. Do not reach underneath the workpiece.
Remove chips and similar material only with the 

machine at a standstill.
Pull the plug out of the socket before making any 

adjustments, converting or servicing the machine.
Danger of injury due to the sharp jigsaw blade. After 

stopping work, the jigsaw blade may still be hot. 

Wear protective gloves.

Reducing dust exposure:

Some of the particles generated using this 

power tool may contain substances known to 

cause cancer, allergic reactions, respiratory 

diseases, birth defects or other reproductive harm. 

Some of these substances include: Lead (in paint 

containing lead), mineral dust (from bricks, 

concrete etc.), additives used for wood treatment 

(chromate, wood preservatives), some wood types 

(such as oak or beech dust), metals, asbestos.

The risk from exposure to such substances will 

depend on how long the user or nearby persons are 

being exposed.

Do not let particles enter the body.

Do the following to reduce exposure to these 

substances: Ensure good ventilation of the 

workplace and wear appropriate protective 

equipment, such as respirators able to filter 

microscopically small particles.
Observe the relevant guidelines for your material, 

staff, application and place of application (e.g. 

occupational health and safety regulations, 

disposal).
Collect the generated particles at the source, avoid 

deposits in the surrounding area.
Use only suitable accessories. In this way, fewer 

particles enter the environment in an uncontrolled 

manner. 
Use a suitable extraction unit.
Reduce dust exposure with the following measures:

- Do not direct the escaping particles and the 

exhaust air stream at yourself or nearby persons 

or on dust deposits.

- Use an extraction unit and/or air purifiers.

- Ensure good ventilation of the workplace and 

keep it clean using a vacuum cleaner. Sweeping 

or blowing stirs up dust.

- Vacuum or wash protective clothing. Do not blow, 

beat or brush.

See page 2.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Overview