Квадроциклы Can Am DS 90 2011 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
MAINTENANCE PROCEDURES
Remove dipstick.
vmo2008-008-021_a
TYPICAL — RH SIDE OF ENGINE
1. Dipstick
Clean the drain plug area.
Place a drain pan under the engine
drain plug area.
Unscrew drain plug.
vmo2008-008-044_a
LH SIDE OF ENGINE
1. Drain plug
Allow sufficient time for all the oil to
flow out of the engine.
Clean
oil
strainer,
refer
to
OIL
STRAINER
in this subsection.
Wipe off any oil spillage on engine.
Reinstall oil strainer, spring, and O-ring.
Install and torque strainer cover to
42 N•m ± 4 N•m (31 lbf•ft ± 3 lbf•ft).
Clean drain plug washer and check it's
condition, replace it if necessary.
Clean engine and drain plug contact
surfaces,
then reinstall drain plug
and torque it to 22.0 N•m ± 2.2 N•m
(16 lbf•ft ± 2 lbf•ft).
Refill engine with the specified quan-
tity of recommended engine oil. Refer
to
SPECIFICATIONS
for capacity.
Start engine and let idle for a few min-
utes. Ensure oil strainer and drain plug
areas are not leaking.
Stop engine. Wait a few minutes to
allow the oil to flow down into the
crankcase, then recheck oil level. Ad-
just oil level if necessary.
Dispose of the used oil as per your local
environmental regulations.
Oil Strainer
Oil Strainer Cleaning
Remove oil strainer and spring for
cleaning (if necessary), refer to
MAIN-
TENANCE SCHEDULE
for details.
vmo2008-008-045_a
UNDERNEATH ENGINE
1. Oil strainer cover
2. Exhaust pipe
_______________
85
