Квадроциклы Can Am DS 90 2011 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
RIDING THE VEHICLE
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Seat
Ensure operator seat is properly installed and latched.
Service and storage
compartments
Check if service and storage compartments are properly
latched.
Chassis and
suspension
Check underneath vehicle for any debris on chassis or
suspension, properly clean chassis and suspension.
What to Do Before Starting the Engine (Key ON)
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Check operation of engine oil/temperature indicator lamp
(during first few seconds of key ON).
Indicator lamps
Ensure the N (neutral) and R (reverse) indicator lamps
come ON as applicable to transmission lever selection.
Check operation and cleanliness of headlights and taillight.
Check operation of high and low beam.
Lights
Check operation of brake light.
Engine
Ensure fuel valve is selected to the ON position.
What to Do After the Engine is Started
ITEMS TO BE
INSPECTED
INSPECTION TO PERFORM
✔
Indicator lamps
Ensure engine oil/temperature indicator lamp is off (shut
engine off if light remains on).
Transmission lever
Check operation of transmission lever (F, N, and R).
Brakes
Drive forward slowly a few feet and apply all brakes
individually to test them. The brakes must fully apply.
Lever and pedal must fully return when released.
Emergency engine
stop switch
Check that the emergency engine stop switch is working
properly.
Ignition switch
Check if ignition switch is working properly by restarting
and stopping the engine.
40
_______
SAFETY INFORMATION
________
