Квадроциклы Can Am DS 90 2011 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
CONTROLS/INSTRUMENTS/EQUIPMENT
Reverse Lamp (RED)
When
lit,
it
indicates
the
transmission
is
in
reverse
position.
8) Ignition Switch
The ignition switch is located in the
middle of the handlebar.
It is a key-operated, 2 position switch:
OFF and ON.
vmo2008-008-012_a
IGNITION SWITCH
1. OFF position
2. ON position
Insert key in switch and turn to ON po-
sition. To remove key, turn key to OFF
position then pull it out.
NOTE:
While
the
engine
can
be
stopped by turning ignition key to OFF
position, we recommend the engine
be stopped using the emergency en-
gine stop switch. Always turn ignition
switch to OFF position after engine
has been stopped.
9) Fuel Valve
The fuel valve is located on the LH side
of the vehicle near the engine.
This is a 3 position rotary valve: OFF,
ON, RES (reserve). Rotate the valve to
align its pointer to the desired position.
vmo2008-008-014_a
LH SIDE OF VEHICLE
1. Align this pointer toward the desired
position
NOTICE
Improper opening of fuel
valve will restrict the flow of fuel.
Make sure valve is fully opened
when engine is running.
OFF
Stops fuel supply to carburetor.
NOTICE
Turn valve to OFF position
when vehicle is not being operated
or when it is being transported.
ON
Allows fuel to flow to carburetor. This
is the normal position for operation of
the vehicle.
While reading this Operator’s Guide, remember that:
WARNING
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
_______________
65
