2E (TMQ0108) - Инструкция по эксплуатации - Страница 26

26

EN

manufacturer. Other cables may be incompatible and cause serious damage to the system 
and power supply.

15) If any malfunction of the device is detected, it is recommended that you immediately contact 

an authorized service center.

16) Failure to comply with the manufacturer’s instructions and / or these safety instructions will 

void all warranties.

STORAGE, TRANSPORTATION AND UTILISATION

1) Transportation of product in original packing to avoid damages.
2) Store in individual packaging in closed, dry, heated rooms at temperatures from +5 ° C to +40 ° C,

relative humidity not more than 60%. The air in the room should not contain acid and other 
vapors that adversely affect the materials of the products.

3) The product should be transported in individual packaging in closed, dry rooms at temperatures 

from -40 ° C to +60 ° C, relative humidity not more than 60%. The air in the transportation room 
must not contain acid and other vapors that adversely affect the materials of the products.

4) If components are already were installed in cases, please check how securely they are fixed  
    or remove it before preparation of case for transportation.
5) Avoid contact with moisture or water on the surface or inside of case to prevent corrosion  
    of material.
6) Utilization of case and it`s packing in accordance with utilization regulations in your country.
7) After the end of the product’s service life, do not dispose of with ordinary household waste, but 

in special collection points for electrical or electronic equipment.