Toshiba RAS-07 - Инструкция по эксплуатации - Страница 7

9.  Adding or editing the program.

The program can be set to perform on all the required 
days until 

 is pressed to con

fi

 rm the setting.

10. If adding or editing a program is required, please repeat 

steps 2 - 8 before setting con

fi

 rmation.

11. After adding or editing, press 

 to con

fi

 rm the 

setting*.

Operating Mode

Weekly timer running
Next program

Timer ON or OFF

Next operation 
time

Operating Temperature 
and Fan speed

Display after 
pressing SET 
button

*Point remote control at air conditioner receiving module 
then, press SET button until you hear the “PiPi” sound. This 
means the setting operation has been completed. As the air 
conditioner is receiving the signal, you will hear separate 
“Pi” sounds corresponding to the number of days in the 
selected setting.
An incomplete setting is indicated if the TIMER lamp is 
blinking. Press 

 twice.

Notes :

1.   Place the remote control where the indoor unit can receive the signal. This will 

increase the accuracy of the timing between the remote control and the air 
conditioning unit.

2.   The ON/OFF timer can be set during the WEEKLY TIMER operation. In this 

situation, the air conditioner will 

fi

 rst follow the normal timer until it is complete; 

then, it will return to the WEEKLY TIMER function.

3.   During WEEKLY TIMER operation, all of operation such as MODE, TEMP, FAN, 

Hi POWER, ECO and etc., can be adjusted but when the clock reaches the 
program setting, the operation will return to the set items in the program.

4.   When the remote control is sending a signal to the air conditioner, avoid 

interference from objects that can block the signal.

Edit Weekly timer program

To edit the program after con

fi

 rming the weekly timer setting, 

follow steps 1 - 3 below.

1.   Press 

.

●

The day of the week and the program number of the 
current day will be displayed.

2. Press 

 to select the day of the week and press 

 to select program number to be con

fi

 rmed.

●

Resetting the operation.

3. Press 

 to exit con

fi

 rming mode.

Deactivating WEEKLY TIMER operation

Press 

 while “WEEKLY” is displayed on the LCD.

●

 The “WEEKLY” indicator will disappear from the LCD. 
However, the program will remain in the remote 
control.

●

The TIMER lamp goes off.

●

 To reactivate the WEEKLY TIMER operation again, 
press 

 again, LCD shows the next program. 

The program, after reactivation, is related to the 
clock time.

TEMP.

PRESET

To delete programs

The individual program

1. Press 

.

●

The day of the week and the program number is 
displayed.

●

Select the day to delete the program.

2. Press 

 to select the program number to be 

deleted.

3. Press 

.

●

ON or OFF timer will be cleared and the LCD will 
blink.

4. Press 

 to delete the program.

●

Press 

 while the LCD is blinking.

The program has now been deleted.

All programs

1. Press 

.

●

The day of the week and the program number will 
be displayed.

2. Press 

 and hold for 3 seconds.

●

All programs will be deleted and LCD displays 
current operation.

Notes :

Make sure the remote control receiving module on the air 
conditioner receives the signal from the remote control.

TEMP.

PRESET

EN

Book_OM_1126250223_EN-UA.indb   7

Book_OM_1126250223_EN-UA.indb   7

19/3/2564 BE   17:05

19/3/2564 BE   17:05