Timberk On/Off AC TIM 60LC ST5 - Инструкция по эксплуатации - Страница 9

www.timberk.com • Electric air conditioner

9

3. Pressing the «TEMP» button (up-down), set the desired air temperature 

indoors (except for FAN mode).
4. Pressing the «FAN SPEED» button on the remote control board, select 

the fan rotation speed: AUTO, LOW, MIDDLE, HIGH, and the conditioner 

will start working in accordance with the selected setting.
5. To turn the conditioner off, press the «ON/OFF» button once again.
In the FAN mode air temperature indoors is not set

DRY

Turn the conditioner on pressing the «ON/OFF» button. Pressing the 

«MODE» button, select the DRY mode. The conditioner will start working 

in the set mode. To turn the conditioner off, press the «ON/OFF» button 

once again.

«TURBO» mode

When pressing the «TURBO» button on the remote control board, the 

conditioner will start working in turbo mode  for maximum cooling (in cool 

mode) or for maximum heating (in heat mode).

TIMER mode

Procedure of timing:
If the conditioner is off, then press the “TIMER” button to activate the 
automatic turning on. Pressing this button once again, set the time for
turning the conditioner on in the set time interval. To cancel the timer mode, 

press the “TIMER” button once again.
 If the conditioner is working, then press the “TIMER” button to activate 

the automatic turning off. Pressing this button once again, set the time for 

turning the conditioner off in the set time interval. To cancel the timer mode, 
press the “TIMER” button once again

.

«SLEEP» mode

Using this button, you may turn the sleep mode on and off. In this mode the 

fan rotation speed will be low.
When the function «SLEEP», if the air conditioner operates in cooling mode, 

set temperature will increase1°C in 2 hours and 2°C over 7 hours.When the 

function «SLEEP», if the air conditioner operates in heating mode, the set 

temperature will decrease2°C in 1 hour and another 2°C within 2 hours of 

work. After 8 hours in SLEEP mode air conditioner turns off.

Regulation of treated air flow direction
Regulating the position of deflectors (blinds), set the direction of treated 

air flow ensuring uniform distribution of temperature and the most comfort 

conditions in the room. To change the position of deflectors, use the 

«SWING» buttons.

8. MAINTENANCE

Before cleaning switch the conditioner off.
Cleaning of the indoor unit and remote control board:
Indoor unit and remote control board should be cleaned with a dry soft 

cloth.
 If the indoor unit is too unclean, moisten the cloth with cold water.
 It is prohibited to clean the remote control board with moist cloth.
 In order to avoid the damage of paint or details of the conditioner, do not 

clean it with brushes and do not leave them on the surface of indoor unit.
In order to avoid the damage of surface or deformation of the conditioner 

details, do not clean it with petrol, solvents, cleaning powders or other 

chemically active substances.
Before a sustained interruption in the conditioner work:
 Turn the conditioner on for several hours in the FAN mode. It will allow you 

to dry its inner cavities
Switch the conditioner off.
Remove the batteries from the remote control board.
Checks before starting:
Make sure that an air filter is installed.
Make sure that air inlet and return air grillages of the outdoor unit are not 

blocked by foreign objects.
Cleaning of air filter
Air filter cleans the air entering the conditioner from dust and foreign 

particles. If the filter is contaminated, the conditioner capacity decreases 

sharply. If the conditioner is operated permanently, the filter should be 

cleaned once per two weeks.
If the conditioner is installed in a room with dusty atmosphere, then the air 

filter should be cleaned more often.