Tesla TT34TP61S - Инструкция по эксплуатации - Страница 41

41

ENG

The heating function allows the air 
conditioner to heat the room.

Change the operating fan speed.

To automatic switch on the appliance.

To automatic switch off the appliance.

To activate the heating function (HEAT), press the   

  button until the symbol     appears on the 

display. With the button   or   set a temperature higher 
than that of the room.

Press 

 button to set the running fan speed, it can 

be set to AUTO/ MUTE/ LOW/ LOW-MID / MID/ MID-
HIGH/ HIGH/ TURBO speed circularly.

When the unit is switch-off, you can set the TIMER ON.
To set the time of automatic switch-on as below:
1.  Press  

  button first time to set the switch-on, 

 and 

 will appear on the remote display and 

flashes.

2.   Press   or   to button to set desired Timer-on time. 

Each time you press the button, the time increases/

When the unit is switch-on, you can set the TIMER OFF.
To set the time of automatic switch-off, as below:
1. Confirm the appliance is ON.
2.  Press the   

  button at first time to set the 

switch-off. 
Press    or   to set the needed timer.

3.  Press  

   button at the second time to confirm.

CANCEL it by press  

   button.

Note:  All programming should be operated within 5 

seconds, otherwise the setting will be cancelled.

1.  Press the button SWING to activate the louver, 

1.1 Press     to activate the horizontal flaps to swing 
from up to down, the       will appear on the remote 
display. 
1.2 Press 

 to active the vertical deflectors to swing 

from left to right, the  

  will appear on the remote 

display. 
1.3 Do it again to stop the swing movement at the 
current angle.

2.  If the vertical deflectors are positioned manually 

which placed under the flaps, they allow to move the 
air flow direct to rightward or leftward.

3. Long press      or 

 over 3 seconds to select more 

angles of the airflow direction.

1.  Long press   

  and  

 button together 

to active this function, and do it again to deactivate 
this function. 

2. Under this function, no single button will active.

HEATING MODE

FAN SPEED function (FAN 
button)

TIMER function ---- TIMER ON

TIMER function ---- TIMER OFF

SWING function

Child-Lock function

     In HEATING operation, the appliance can 

automatically activate a defrost cycle, which is 
essential to clean the frost on the condenser so 
as to recover its heat exchange function. This 
procedure usually lasts for 2-10 minutes. During 
defrosting, indoor unit fan stop operation. 
After defrosting, it resumes to HEATING mode 
automatically.

     (For  North  American  market)

 If necessary, you 

can press ECO button 10 times within 8 seconds 
under heating mode to start the forced defrosting. 
It will defrost the outdoor ice much more fast.

decreases by half an hour between 0 and 10 hours 
and by one between 10 and 24 hours.

3. Press  

  button second time to confirm.

4.  After Timer-on setting, set the needed mode (Cool/ 

Heat/ Auto/ Fan/ Dry), by press the 

  button. 

And set the needed fan speed, by press 

button. And press   or   to set the needed operation 
temperature.

CANCEL it by press  

   button.