Tesla TT34EXC1-1232IA - Инструкция по эксплуатации - Страница 54

54

ENG

1.   Wind insulating covering around the joints of the ind- 

oor unit and fix it with insulating tape.

2.   Fix the exceeding part of the signal cable to the piping 

or to the outdoor unit.

3.   Fix the piping to the wall ( after having coated it with 

insulating tape) using clamps or insert them into pla- stic 
slots.

4.   Seal the hole in the wall through which the piping is 

passed so that no air or water can fill.

Indoor unit test

•  Do the ON/OFF and FAN operate normally? 
•  Does the MODE operate normally?
•  Do the set point and TIMER function properly? 
•  Does each lamp light normally?
•  Do the flap for air flow direction operate normally? 
•  Is the condensed water drained regularly?

3-way valve diagram

connect to indoor unit

open position

spindle

needle

service port cap

Valve core

Connect to

outdoor unit

Refrigerant flow 

direction

2-way valve

3-way valve

6. Open 1/4 turn

7. Turn to fully open the valve

7.  Turn to fully open 

the valve

Valve cap

Valve cap

1. Turn

2. Turn

8. Tighten

Service

port nut

1. Turn

8. Tighten

8. Tighten

Indoor 

unit

Operation test

Clamps

insulating 

covering

insulating 

tape

piping

gasket

(outdoor)

(indoor)

piping

wall