Tesla TT34EXC1-1232IA - Инструкция по эксплуатации - Страница 47

47

ENG

Category

LFL

(kg/m

3

)

h

0

 (m)

Charge amount (M) (kg) Minimum room area (m

2

)

4

7

10

15

20

30

50

R290

0.038

0.152kg

0.228kg

0.304kg

0.456kg

0.608kg

0.76kg

0.988kg

0.6

82

146

328

584

912

1514

1

30

53

118

210

328

555

1.8

9

16

36

65

101

171

2.2

6

11

24

43

68

115

R32

0.306

1.224kg

1.836kg

2.448kg

3.672kg

4.896kg

6.12kg

7.956kg

0.6

29

51

116

206

321

543

1

10

19

42

74

116

196

1.8

3

6

13

23

36

60

2.2

2

4

9

15

24

40

Table GG.2 - Minimum room area (m

2

)

Installation Safety Principles

1. Site Safety

2. Operation Safety

3. Installation Safety

•  Open Flames Prohibited
•  Ventilation Necessary

•  Mind Static Electricity 
•  Must wear protective clothing and anti-static gloves
•  Don`t use mobile phone

•  Refrigerant Leak Detector
•  Appropriate Installation Location

Please note that:

1.  The installation site should be in a well-ventilated condition.
2.  The sites for installing and maintaining an air conditioner using Refrigerant R290 should be free from open fire 

or welding, smoking, drying oven or  any other heat source higher than 370    which easily produces open fire; 
the sites for installing and maintaining an air conditioner using Refrigerant R32 should be free from open fire 
or welding, smoking, drying oven or any other heat source higher than 548  which easily produces open fire.

3.  When installing an air conditioner, it is necessary to take appropriate anti-static measures such as wear anti-

static clothing and/or gloves.

4.  It is necessary to choose the site convenient for installation or maintenance wherein the air inlets and outlets 

of the indoor and outdoor units should be not surrounded by obstacles or close to any heat source or 
combustible and/or explosive environment.

5.  If the indoor unit suffers refrigerant leak during the installation, it is necessary to immediately turn off the valve 

of  the outdoor unit and all the personnel should go out till the refrigerant leaks completely for 15 minutes. If 
the product is damaged, it is a must to carry such damaged product back to the maintenance station and it is 
prohibited to weld the refrigerant pipe or conduct other operations on the user’s site.

6.  It is necessary to choose the place where the inlet and outlet air of the indoor unit is even.
7.  It is necessary to avoid the places where there are other electrical products, power switch plugs and sockets, 

kitchen cabinet, bed, sofa and other valuables right under the lines on two sides of the indoor unit.