Tesla TT34EXC1-1232IA - Инструкция по эксплуатации - Страница 44

44

ENG

Self-clean function

Timer function

8°C heating function

Press OPTION at the fist time , select the CLEAN by pressing the 
button   or   until symbol CLEAN is flashing; Press OPTION again to 
activate the CLEAN function, and 

 appears on the display. Do it 

again to deactivate this function.

For timer on, before proceeding with the time: Switch the conditioner 
off (with the key 

). program the working mode with the button 

MODE

 and the fan speed with the button 

FAN

.

Timer setting/change/cancel:

1.  Press 

OPTION

 at the fist time, select the Timer by pressing the 

button   or   until symbol 

TIMER

 is flashing;

2.  Press 

OPTION

 again, the data symbol like 

 and 

TIMER

 will 

be flashing;

3. 

To set the timer orchange the timer

: 

(1) Press the button    or   to set the expected timer (Increase or 
decrease at half-hour intervals) the symbols   and 

TIMER

 both are 

flashing. 
(2) Press 

OPTION

 or wait for 5 seconds without any operation 

to confirm the timer, the pre-setting timer like  

 and symbol 

 will be on the display. 

To cancel the timer (if TIMER is on)

Press 

OPTION

 or wait for 5 seconds without any operation to 

cancel the timer .

Note: All processing should be operated in 5 seconds, otherwise the 
processing will be cancelled.

1.  Press 

OPTION

 at the first time, select the 8

°

C H by pressing the button    or   until symbol 8

°

C H is flashing; 

Press 

OPTION

 again to activate the 8

°

C heating function, and 

 appears on the display. Do it again or 

change the mode to deactivate this function. 

2.  This function enable the setting temperature 8

°

C when heating.

1.   This function help carry away the accumulated dirt, bacteria, etc from the evaporator.
2.   This function will run about 30 minutes, and it will return to the pre-setting mode .You can press 

 or 

MODE

to cancel this function during the process. You will hear 2 beeps when it’s finished or cancelled.

3.  It’s normal if there are some noise during this function process, as plastic materials expand with heat and 

contract with cold.

4.  We suggest operate this function as the following ambient condition to avoid certain safety protection 

features. 

Indoor unit

Temp<30

°

C

Outdoor unit

5

°

C <Temp<30

°

C

5.  We suggest operate this function per 3 months.

Switch off the air conditioner.

To set the automatic switch-on /off of the air conditioner

Only can be set in Heating mode 

Figure 1

Timer-on
when switch off

Figure 2

Timer-off  
when switch on