Mitsubishi Electric MSZ-LN25VGW - Инструкция по эксплуатации - Страница 7

En-6

I

-SEE  OPERATION

Press 

 during COOL, DRY, HEAT and AUTO mode 

to activate the i-see control mode.

•  Press gently using a thin instrument.

• 

 lights. (Operation display section)

•  The default setting is “active”.

2

Press 

 several times to cancel the i-see control 

mode.

Note:

Any person at the following places cannot be detected:

• Along the wall on which the air conditioner is installed

• Directly under the air conditioner

• Where  any  obstacle,  such  as  furniture,  is  between  the  person  and  the  air 

conditioner

A person may not be detected in the following situations:

• Room temperature is high.

• A person wears heavy clothes and his/her skin is not exposed.

• A heating element of which temperature changes significantly is present.

• Some heat sources, such as a small child or pet, may not be sensed.

• A heat source and the air conditioner are more than 6 m apart.

• A heat source does not move for a long time.

Do not touch the i-see sensor. This may cause malfunction of the i-see sensor.

The  intermittent  operating  sound  is  a  normal  sound  produced  when  the  i-see 

sensor is moving from side to side.

Refer to 

 page 9 

 “Absence Detection” for 

 and 

.

1

2

In  the  i-see  control  mode,  the  room  temperature  is  controlled  based  on  the 

sensible temperature. 

Cancel

JG79Y370H02_01En.indd   6

2018/01/18   14:21:47