NETGEAR GS316EPP 15x1GE PoE - Инструкция по эксплуатации - Страница 94

Коммутаторы NETGEAR GS316EPP 15x1GE PoE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 110
Загружаем инструкцию
background image

5. Select PD HEALTH MONITORING.

The PD Health Monitoring page displays.

6. Click the port where the PD that you want to test is attached.

When the port is selected, the port button displays solid purple.

7. Click the PD Health Monitoring button to enable the feature.

When enabled, the button bar displays green.
A status message displays to confirm whether the PD Health Monitor is ready.
The PD IP Address field displays the IP address of the PD.

8. In the Ping Time Interval field, enter the time interval in seconds for the ping test.

The default value is 60 seconds.

9. Click the button to enable or disable the If an error occurs while the PD Health

Monitor is running, restart the PoE option.
When enabled, the button bar displays green.

10. Click the button to enable or disable the If the Restart Count is over 5 then disable

PoE option. If you want to use a different count value, select 10 or 20 from the menu.
The option is disabled by default, with the count set to 5.

11. When your settings are complete, click the APPLY button.

The ping test on the PD begins.

Total Count: The number of ping tests conducted.

Failure Count: The number of tests where the ping failed to complete.

Restart Count: The number of times that the PoE port was reset.

Manage uninterrupted PoE

If you enable the uninterrupted PoE feature, the switch continues to provide PoE power
to any attached PDs while the switch is rebooting, even if it is rebooting after a regular
firmware update. By default, the uninterrupted PoE feature is disabled, so that the switch
stops providing PoE power while it is rebooting.

Even with the feature enabled, the switch temporarily stops providing PoE in the following
situations:

The switch reboots because you reset it to factory default settings.

The switch reboots because you installed updated firmware that changed
configuration options, the chip driver, or the default PoE settings.

User Manual

94

Maintain and Monitor the Switch

Gigabit Ethernet Plus Switches

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к NETGEAR GS316EPP 15x1GE PoE?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"