Коммутаторы NETGEAR GS316EPP 15x1GE PoE - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
The button bar displays gray, indicating that the DHCP client of the switch is disabled,
and the IP address fields become editable.
6. Enter the fixed (static) IP address that you want to assign to the switch and the
associated subnet mask and gateway IP address.
You can also either leave the address in the IP Address field as it is (with the IP
address that was issued by the DHCP server) or change the last three digits of the
IP address to an unused IP address.
7. Write down the complete fixed IP address.
You can bookmark it later.
8. Click the APPLY button.
Your settings are saved. Your switch web session is disconnected when you change
the IP address.
9. If the login page does not display, in the address field of your web browser, enter
the new IP address of the switch.
The login page displays.
10. For easy access to the device UI, bookmark the page on your computer.
Assign a fixed IP address by connecting directly to the switch
off-network
If you cannot connect to the switch over a network connection, you can
set the IP address of the switch by using an Ethernet cable to connect directly to the
switch.
To disable the switch's DHCP client and change the IP address of the switch to a
fixed IP address through a direct connection:
1. Connect an Ethernet cable from your computer to an Ethernet port on the switch.
2. Change the IP address of your computer to be in the same subnet as the default IP
address of the switch.
The default IP address of the switch is 192.168.0.239. This means that you must
change the IP address of the computer to be on the same subnet as the default IP
address of the switch (192.168.0.x).
The method to change the IP address on your computer depends on the operating
system of your computer.
3. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
4. Enter 192.168.0.239 as the IP address of the switch.
The login page displays.
5. Enter the device management password.
User Manual
19
Install and Access the Switch in
Your Network
Gigabit Ethernet Plus Switches
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
