Cypress CPLUS-V8H8HP UHD - Инструкция по эксплуатации - Страница 9

4

9

 ALL: 

Press this button to select all outputs simultaneously for routing. 

Next, press the “IN” key of the input (1~8) you wish to route to all 

outputs. Finally, press “CONFIRM” to confirm your selection and 

execute the routing change.

10

 PRESET: 

Press to enter the preset recall menu in the LCD window. 

Press the “+/-” buttons followed by the “ENTER” button to select 

and activate the preferred preset.

11

 LOCK: 

Press to lock all button functions on the front panel. Press 

and hold for 3 seconds to release the lock function. The LCD will 

display “Lock” when the function is active.

12

 MUTE: 

The “MUTE” button functions as a blank audio/video source. 

To use it, follow the standard matrix routing instructions, but use 

the “MUTE” button as the input to blank out the selected outputs. 

When a “MUTE” input is in use it will show up as “M” within the 

routing display.

13

  LCD WINDOW: 

Displays the unit’s menu, settings and information.

6.2 Rear Panel

1

2

3

4

5

6

7

8

HDMI IN

A

B

C

D

E

F

G

H

HDMI OUT

USB 5V/1A OUT

1

2

3

4

5

6

7

8

CONTROL

RS232

SERVICE

DC 24V

IR IN

1

2

3

6

5

4

7

8

1

  HDMI IN 1~8: 

Connect to HDMI source equipment such as media 

players, game consoles or set-top boxes.

2

  HDMI OUT A~H: 

Connect the HDMI outputs to devices such as 

HDMI TVs, monitors or amplifiers for digital video and audio output.

3

  USB POWER OUTPUT 1~ 8: 

Each USB port provides 5V/1A of power 

intended for use with HDMI over AOC (Active Optical Cables) 

fiber optic video extension cables. Power on each port may be 

individually enabled/disabled.

Note: If a USB device requiring more than 1A is connected, the 

port will automatically shut off to prevent an overload and the red 

LED will turn on.

4

  IR IN: 

Connect to the provided IR Extender to extend the IR control 

range of the unit. Ensure that the remote being used is within direct