Philips RI8329 Saeco - Инструкция по эксплуатации - Страница 12

• 12 •

machine is on.

Fill up (as described in the 

“HOT WATER”

 chapter of the 

manual) 2 cups of water (about 150  ml each) from the 
steam/hot water wand. Turn off  the machine by pressing 
the ON/OFF button (14) and leave it off  for 3 minutes.

7

  Repeat the operations described in 

step 6

 until the water 

tank is completely empty.

8 (Fig.2) 

- 

Rinse the water tank and fi ll it with fresh drinking 

water. Turn on the machine by pressing the ON/OFF button 
(14). The (15) indicator light will turn on to indicate that 
the machine is on.

9 (Fig.6) 

- 

Place a container under the steam wand. Open 

the knob (3) slowly by turning it counter-clockwise. 

(Fig.7) - 

Press the brew button (16).

10

 Dispense the whole water tank content through the 

steam/hot water wand. 

(Fig.7) - 

Press the brew button (16) again to end the op-

eration.

(Fig.8) - 

Close the knob (3) by turning it clockwise.

11 (Fig.2) - 

Fill the water tank with fresh drinking water.

12 (Fig.14) - 

Place a suitable container under the fi lter hold-

er. 

13 (Fig.15) - 

Press the brew button (16) and dispense all 

the water in the tank. Once the water tank is empty, stop 
dispensing by pressing the brew button (16) again. At the 
end, empty the container.

14 

Repeat the operations from 

step (8)

 once again, for a total 

of 4 tanks. The machine is now ready to be used.

(Fig.17) - 

Remove the fi lter holder from the unit by turning it 

from right to left and rinse it with fresh drinking water.

The descaling cycle is now complete.

(Fig.2) - 

Fill the tank again with fresh water. If necessary, 

prime the circuit as described in section 4.5 of the manual.

10 DESCALING

Limescale normally builds up with the use of the appliance. 
The machine needs descaling every 1-2 months (if used) and/
or whenever a reduction in water fl ow is noticed. Use the Saeco 
descaling product only. 

In case of confl ict, priority must be given to 
what is indicated in the operation and mainte-

nance manual over the instructions provided on sepa-
rately sold accessories and materials. 

Use the Saeco descaling solution only. Its formu-
la has been designed to ensure better machine 

performance and operation for its whole operating life. 
If correctly used, it also avoids alterations in the brewed 
product. The descaling solution is to be disposed of ac-
cording to the manufacturer’s instructions and/or the 
regulations in force in the country 
of use.

Never drink the descaling 
solution or any products 

dispensed until the cycle has 
been completed. Never use vin-
egar as a descaling solution.

1 (Fig.12-13) - 

Insert the fi lter 

holder (without coff ee) into the 
brew unit (8) from the bottom 
and turn it from left to right until 
it locks into place.

2 (Fig.1) 

- 

Remove and empty the water tank.

3 (Fig.2) 

- 

Pour 

THE ENTIRE

 content of the Saeco concen-

trated descaling solution into the water tank, and then fi ll 
the tank with fresh drinking water up to the MAX level.

4

  Turn on the machine by pressing the ON/OFF button (14). 

The (15) indicator light will turn on to indicate that the 
machine is on.

Fill up (as described in the 

“HOT WATER”

 chapter of the 

manual) 2 cups of water (about 150  ml each) from the 
steam/hot water wand and turn off  the machine by press-
ing the ON/OFF button (14). The indicator light (15) turns 
off .

5

  Let the descaling solution take eff ect for approx.15-20 

minutes with the machine turned off .

6

  Turn on the machine by pressing the ON/OFF button (14). 

The (15) indicator light will turn on to indicate that the