Black+Decker BXCO850E - Инструкция по эксплуатации - Страница 7

Кофеварка Black+Decker BXCO850E - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 88
Загружаем инструкцию
background image

ENGLISH

(Original instructions)

7

How to deal with lime scale incrustations:

 

For the appliance to work correctly it should be kept free 

of lime scale or magnesium incrustations caused by the 

use of hard water.

 

To prevent this kind of problem, we recommend the use 

of water with low lime or magnesium mineralisation.

 

However, if it is not possible to use the kind of water 

recommended above, you should periodically remove 

the lime scale from the appliance:

 

♦ Every 6 weeks if the water is “very hard”.

 

Every 12 weeks if the water is “hard”.

 

♦ To do so, we recommend the use of a specific Decal 

product for this kind of machine which can be found in 

specialised shops and authorised technical services.

 

Homemade solutions are not recommended in the des-

caling of this appliance, such as the use of vinegar.

ANOMALIES AND REPAIR

 

Take the appliance to an authorised technical support 

service if problems arise. Do not try to dismantle or 

repair without assistance, as this may be dangerous.

 

If you detect any anomalies, refer to the following table:

 

 

Anomaly 

Possible cause

Solutions

Water flows out of the side 

of the holder

The filterholder is not fitted correctly.

The Edge of the sieve is covered 

coffee.
The brewing set is dirty.

see Section "filling coffee".

Clean the sieve around the edge and clean 

the brewing of coffee set
 Clean With a damp cloth.

No coffee comes out

There is no water. 

The water tank is not properly 

placed. 

The filter holes are clogged, the 

coffee is ground too fine or has been 

pressed too much .

Fill the water tank.
Make sure the tank is properly seated. 

Empty the filter basket and clean with water. 

Clean the brewing unit with a damp cloth. Fill 

the sieve again and press the coffee slightly.

The coffee comes out 

slowly or drop by drop

The coffee grinding is too fine or too 

pressed.

Make sure grinding is OK and it’s not too 

pressed.

The coffee comes without 

cream

The used Coffee is out of date. 

The Coffee has not been pressed 

enough. 

The Ground coffee is too coarse.

Use Fresh coffee and once opened store in 

an airtight container. 

Press slightly the coffee. 

Grind finer the coffee.

The coffee comes out 

too fast

The ground coffee is too coarse. 

There is not enough coffee in the 

sieve. 

The Coffee has not been pressed 

enough.

Grind coffee finer.

 

Ensure that it’s the right amount of coffee in 

the sieve. 

Press slightly the coffee.

No steam escapes from 

the evaporator tube

The Tube is clogged.

Clean the steam tube with a damp cloth to 

remove any traces of milk have dried and 

unblock holes using a needle. Press the 

corresponding switch and remove “hot water” 

until it goes out continuously.

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к Black+Decker BXCO850E?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"